PDA

View Full Version : Wanted to Buy



  1. Trading Forums: Rules, FAQ and Access. Template Inside
  2. SRAM clutched X0 shortcage 10sp derailleur, XG-1099/1080 cassette, XX shifter 10sp
  3. WTB. Small 26" duallie frame.
  4. 200 x 50/57 Coil shock
  5. Stans 3.30 Ti XD freehub
  6. WTB - M or L 6 Inch Travel or more Enduro/light freeride frame - 26" 1.5 Steerer
  7. VIC MRP G3 lower guide/taco
  8. WTB. Small, 26" trail bike (prefer Santa Cruz)
  9. WTB - parts for my daughter's new bike
  10. VIC WTB Specialized 155mm wide saddle
  11. 20mm Rockshox Domain axle / maxle thingo
  12. 55mm stem
  13. VIC Large Frame, 29" or 27.5"
  14. 26 inch front wheel, MTX31 rim, 20mm.
  15. WTB: Bike Yoke #1 For 2011 Enduro 26'
  16. VIC The relevant authorities have been notified. Run.....
  17. Rigid 26inch fork
  18. commuter grade disc brake RH lever/ front
  19. Kona Minute (also considering other long tails)
  20. Sb66
  21. QLD Race Face Next SL or SL G4 in 175mm
  22. QLD WTB: Santa Cruz V1 Bronson Medium frame or complete!!!
  23. QLD Roof mount bicycle rack
  24. VIC Seeking doner bike for a GT Lopes 4x project.
  25. wt swap, my old boxxer for your 40s
  26. NT Black shimano xt cranks 104bcd 170 or 175mm
  27. 27.5 wheels near Canberra sold
  28. Nukeproof scout or commencal meta HT
  29. 29er Steel frame for AM duties, most likely a large. Kona Honzo ST etc
  30. MRP Upper Chain Guide, Guide
  31. [WTB][VIC] Shimano Front Derailleur
  32. (QLD) 8.75 x 2.5 rear shock (or 222mm x 63.5mm)
  33. Wtb large 26 hardtail frame
  34. VIC Rigid 29er Carbon Forks
  35. Need a headset top bearing cover sold
  36. ACT ISCG OLD chain guide to suit 36T chain ring
  37. WTB old Saint shortcage derailleur
  38. WTB 26 inch air fork 100-120mm
  39. 8mm by 22mm rear shock mounting hardware
  40. VIC stans 3.30 type 2, 12 x 142mm rear Axel
  41. VIC DT Swiss Freehub 10spd
  42. VIC Wtb asap 1.5 tapered headset
  43. 15x110 Boost fork mount
  44. 11-23t 10 speed cassette, SRAM PG1070 or similar
  45. Small fat bike wanted
  46. VIC XX1 Rear Mech
  47. WTB: Fox 3 Pos lever CTD
  48. NSW WTB 26" QR wheelset
  49. NSW WTB 40mm X 8mm offset mounting hardware
  50. Straitline pedal rebuild kit
  51. QLD WTB Surly Big Dummy /Cargo bike / longtail
  52. Wanted straight steerer 29er 120mm fork
  53. NSW 26inch rim brake wheels
  54. NSW Wanted - 2 speed front shifter - bar mount
  55. VIC 200x51 Monarch + RC3 or CC DB CS
  56. WANTED- QR end caps for DT swiss 240s rear hub
  57. Looking for a SANTACRUZ VP-FREE
  58. Need a few bikes
  59. QLD WTB 24 inch Zocchi forks D streets
  60. VIC SID rebound damper glide ring/s
  61. QLD Klunker
  62. 1.8 mm spoke nipples
  63. VIC Fox FIT fork cartridge
  64. VIC 27.2 seatpost with alittle flexy goodness.
  65. NSW XS XC frame and parts
  66. NSW 24" street trials
  67. VIC 21 or 23" XC frame
  68. WTB: Fox Factory Rear Shock
  69. QLD WTB: Small sized dual suspension frame
  70. Orange 322 frame
  71. VIC 165mm 104bcd crank [driveside or both]
  72. VIC WTB: older style Grip Sport 2-bike rack (crank holder)
  73. 29er QR fork rigid or 100mm travel NON tapered
  74. VIC WTD: Cheap cranks, eg Hussefets or anything cheap
  75. 15x110, 12x148 boost hubs
  76. WTB. Schraeder tubeless valves.
  77. VIC WTB: Azonic Momentum Axle or any 12mm to 9mm dropout axle
  78. KHS Solo One 29er frame/fork-large or On One Indred 29er frame
  79. 35mm Salsa Lip Lock Seatpost Clamp
  80. Handlebars
  81. VIC SWAP: my 160mm DP 27.5 Pikes for your 140mm Pikes or Yaris.
  82. VIC 26" Rear Wheel with 14mm Bolt up Axle
  83. WTB, Melb, Single Speed Rigid 29er
  84. VIC Sold
  85. Dirt Jump Fork
  86. Saint M820 rear brake
  87. WTB. SRAM XD cassette and XD freehub for hope Evo.
  88. Shimano brake lever/s
  89. NSW WTB: thru bolt QR or bolt up. 9mm X 100 and 10mm X 135.
  90. VIC Wanted - 26" wheelset 20mm front / 135x10 rear