Falcon runs!
215hp SOHC I6 with a 2.5" pipe, a meaty swaybar and freshly painted things all installed.
Took a couple of weekends and some serious time, but since I tore a hamstring I haven't been riding so more time for car work!
Most of it was plug and play which made it a little easier but some hoses were slightly difficult, holy hell the bellhousing sucked!!!! After a massive effort to get them out, turns out if you put a jack under the back of the gearbox, it's easier if you just undo the two transmission crossmember bolts, and drop the sucker down a bit, 18" of extension on a half inch drive with a flex joint, easy as.
It runs now, just got a little bit of vacuum line to figure out, and a new gasket on the thermostat, new radiator cos it's got a hole in it, get the engine serviced, and it'll be mint!
Driveway engine swap done! Cross it off the bucket list.
Will attach some pics when I get home from school
Cheers all,
Nitro
PS: Inbox me if you want parts off a 115xxxkm E series I6, got some excess stuff now