And when she saw It; she said you may as well just finger me...Forgot my Metrics were 165mmish and now wondering if I should put the Rux back on..
A friend ran a similar stem from Funn many years ago. He was a big unit and it was on a demo. It held up just fine. He wasn't pushing the limits of the bike with his riding style though, but did I mention he was a big unit?
I ran a funnduro stem for about 18 months, maybe even 2 years. It held up really well.Yeah, too short. You'd need at least some of the steerer over that top bolt.
I'm guessing that's a 40mm stack height? Have a look at a Funny Funnduro or a Tablet stem, they're both around the 30/32mm stack height.
P.S. If you saw mine at Bright, I'm still alive! :thumb:
Close, it's 35mm high. Problem is you need to put a 5mm spacer under the stem because it fouls on the headset so that doesn't help. The one I ordered has a 30mm-ish stack minus the 5mm spacer because it looks like it won't mess with the top cup.. So that'll take the steerer to the top of the new stem hopefully. Then I'll put the 5mm spacer on top and tighten away.I'm guessing that's a 40mm stack height?
That's one light air shock.Close, it's 35mm high. Problem is you need to put a 5mm spacer under the stem because it fouls on the headset so that doesn't help. The one I ordered has a 30mm-ish stack minus the 5mm spacer because it looks like it won't mess with the top cup.. So that'll take the steerer to the top of the new stem hopefully. Then I'll put the 5mm spacer on top and tighten away.
Fun machine will be ready for testing at Thredbo this weekend then tweaked for the last two bright shuttle weekends
Think you got that a bit arse-about.... You want the bolt to be level with or below the top of the steerer.does the upper stem bolt sit higher than the steerer? if so i'd ride it. If not probably give it a miss... what is the stack height of your stem?
Yeah i done confused myself with them wordsThink you got that a bit arse-about.... You want the bolt to be level with or below the top of the steerer.
The steerer should only be about 3mm below the top of the stem; just enough to ensure you can properly preload the headset without the top cap bottoming out on the steerer.
Nah I've got a blue front in 27.5 but want to go back to 26" all around so I'll just smash the rear spoon before I lace another 823... Do you want your old matching blue front wheel back? That'd complete the picture nicely...
It's funny. I thought it was just me that thought 27.5 wasn't all that....Nah I've got a blue front in 27.5 but want to go back to 26" all around so I'll just smash the rear spoon before I lace another 823.
650b on the Spitty is good. Very same wheels on the Darkside not so good.It's funny. I thought it was just me that thought 27.5 wasn't all that....
Told Daz, I'm trying shockless before I go brakeless. New fad M8.That's one light air shock.