My dropper post is too long. I need to cut the seat tube by about 12mm so I will have the correct leg length from pedal to saddle.
Needing advice on how to make sure a get a straight cut on the same angle as the seat post is.....aka: what could I use as a guide? I'm hoping to do it with a pipe cutter....OR I'd rather go to a local machine shop at Thornleigh, Sydney as I'm pretty hopelss with tools plus a good quality pipe cutter will set me back $75
thanks
Needing advice on how to make sure a get a straight cut on the same angle as the seat post is.....aka: what could I use as a guide? I'm hoping to do it with a pipe cutter....OR I'd rather go to a local machine shop at Thornleigh, Sydney as I'm pretty hopelss with tools plus a good quality pipe cutter will set me back $75
thanks