ashes_mtb
Has preferences
Had to install a new hose for my rear XT brake and am having a hell of a time getting them going. Still getting no lever feel or movement at the piston.
Barb and olive are in good and no leaks.
Ditto at the banjo, remembered the o-rings and there's no leaks there.
Have pushed oil up from bottom to top with a syringe about 6 times. Oil comes up into the funnel with no air bubbles.
Also tried just a gravity bleed from the funnel down. Both with just gravity and also pumping the lever.
No air bubbles coming out in the funnel when I pump the levers with bottom bleed point shut.
Got me beat - any suggestions?
Barb and olive are in good and no leaks.
Ditto at the banjo, remembered the o-rings and there's no leaks there.
Have pushed oil up from bottom to top with a syringe about 6 times. Oil comes up into the funnel with no air bubbles.
Also tried just a gravity bleed from the funnel down. Both with just gravity and also pumping the lever.
No air bubbles coming out in the funnel when I pump the levers with bottom bleed point shut.
Got me beat - any suggestions?