Asininedrivel
caviar connoisseur
I'm betting the plants digest it within a year.@Asininedrivel Your outdoor table has a slack headangle.
I'm betting the plants digest it within a year.@Asininedrivel Your outdoor table has a slack headangle.
The poor thing has far bigger issues, namely Daniel Hale, than me putting a longer stem on it. I checked the rear sag last night. WITHOUT any riding gear, let alone the tools and shit I carry during the week, it was sitting at 50%. When I get the arse end right I'll look at the front. Explains the reversed angle headset and ridiculously oversized front tyre, he was trying to regain the lack of front end from dropping the arse end so much.Since forever. Short stem, wide bars because standing up and trying to carve turns with long stems sucks.
Didn’t you ever rear dirt mag? They knew what was up. Short travel fun bikes, chainguides for every type of bike, short stems and wide bars across the board. Regardless of tt length, it’s about steering feel.
Wait....he ended up still doing that? ERMAGHERD!Explains the reversed angle headset
No, well, not on this bike anywayWait....he ended up still doing that? ERMAGHERD!
You really think you'll get a 27.5 in the back? The one Turner I know has a very snug fit on the 26 with a 2.3 maxxisThe poor thing has far bigger issues, namely Daniel Hale, than me putting a longer stem on it. I checked the rear sag last night. WITHOUT any riding gear, let alone the tools and shit I carry during the week, it was sitting at 50%. When I get the arse end right I'll look at the front. Explains the reversed angle headset and ridiculously oversized front tyre, he was trying to regain the lack of front end from dropping the arse end so much.
I'd really like to get it back to something like this, not 26" though
View attachment 366838
It's already there, but yes, it's tight. Any more than 35psi (freshly mounted tyre that i firgot to de-pressure) and the tread blocks rub on a 2.1" Maxxis IgnitorYou really think you'll get a 27.5 in the back? The one Turner I know has a very snug fit on the 26 with a 2.3 maxxis
Tighter than a nun's nasty.It's already there, but yes, it's tight. Any more than 35psi (freshly mounted tyre that i firgot to de-pressure) and the tread blocks rub on a 2.1" Maxxis Ignitor
Now that's a saying I don't hear enough these daysTighter than a nun's nasty.
Grind the side knobs down a bit.It's already there, but yes, it's tight. Any more than 35psi (freshly mounted tyre that i firgot to de-pressure) and the tread blocks rub on a 2.1" Maxxis Ignitor
Run a kojac.Grind the side knobs down a bit.
It's actually the centre knowsGrind the side knobs down a bit.
Minion SSRun a kojac.
What about The Mullet look ?It's actually the centre knows
Minion SS
Could. It came with a 26" rear as wellWhat about The Mullet look ?
Could. It came with a 26" rear as well
Hairline fractures in the frame have made it unsafe.More laps on the roadie
Trying to work out a line of reasoning that will convince the wife that me selling the Capra to fund a Rail is a sensible and good idea...