Most likely an m4 pin option from local bolt shop.
Lovely thanks! Now I've discovered this I'm going to see if I really need new pedals.
I buy in bulk off eBay. I keep various lengths and styles.
Yup those be the ones.
Depends on the pedal thickness. Some of mine are fine with 8mm, others 10mm. Also depends on where they are missing from. Often longer ones on leading edges than middle.
Fuck, it appears the outers are grub screws with a hollow end.
Buy those in bulk too. I remember buying 3 sizes first time around and just reordering the ones that fit. They were cheap as.
Now to buy 150 M4 pins from China... lol
Atta boy!! Work smarter not harder.
Some will be screwed in from other side, some will screw into body. You’re overthinking it.
Yup it's ok, they unscrew from the top, the hollow bit being the hex key head
Never.
Clearly, 10mm+ is the answer.Yup it's ok, they unscrew from the top, the hollow bit being the hex key head
They seem to be 7mm long which is a bit chunty as I can only get 6mm or 8mm grub screws. Hey ho!
200 grub screws it is then..
Get mum on the job! Small parts organisers are great for all the bits you collect - spare bolts, stem spacers, grip lock rings, brake adapters... And pedal pins!
www.bunnings.com.au
Why so few?
Because I don't have a brood of world champ in the making Enduro riders.
And you never will with THAT attitude.