fjohn860
Alice in diaperland
That is fkn amazing! Love itHere's my latest metalwork project....
View attachment 397026View attachment 397027
View attachment 397028View attachment 397029
That is fkn amazing! Love itHere's my latest metalwork project....
View attachment 397026View attachment 397027
View attachment 397028View attachment 397029
Thanks!That is fkn amazing! Love it
My mum would have loved something like that for her room when she was in care.Thanks!
I have a Facebook and Insta page where you can see the stuff I make.
www.instagram.com/scrapbunker/
www.facebook.com/profile.php?id=100086811744823
That winding handle would be better replaced with a hex you can chuck a ratcheting ring spanner on IMO, but otherwise very cool!Saw this today. Great idea.
Alligator's Lab on Instagram: "Extracción Fácil, rápido y seguro "
4,284 likes, 111 comments - alligator_ride_lab on February 21, 2023: "Extracción Fácil, rápido y seguro "www.instagram.com
The extra handle is handy for when you use the puller as a hammer though, extra handle for two handed hammer action.That winding handle would be better replaced with a hex you can chuck a ratcheting ring spanner on IMO, but otherwise very cool!
That some kind of street luge death machine?I've been doing NO machining for a while, which is sad as I'm a toolmaker by trade..
My job now is a CAD jockey..
But I have a factory full of laser cutters and folders at my disposal.. I decided I need a street luge so did some pretty pictures and bamm here it is..
View attachment 398121
Not happy with the handle bar because it doesn't have enough room for my hands with gloves on so welding a new one up now..
It's going to scare me haha
FAB1 chassis?I've been doing NO machining for a while, which is sad as I'm a toolmaker by trade..
My job now is a CAD jockey..
But I have a factory full of laser cutters and folders at my disposal.. I decided I need a street luge so did some pretty pictures and bamm here it is..
View attachment 398121
Not happy with the handle bar because it doesn't have enough room for my hands with gloves on so welding a new one up now..
It's going to scare me haha
Yeah fucking WOT????Here's my latest
Nice job!Mate asked me to machine up a bracket for a supercharged ls. The idler in the stock position interfered with the snout on the charger. Bit of 25 thick 6061 and some time and it worked out pretty well. Lousy phone pics...
Skimmed the top and bottom flat then cut the basic shape on the bandsaw. Back to the mill to tidy up the saw cuts. Then milled half away from one side and half on the opposite side. The housing is tapped M10x1.5 so some 10mm holes to bolt the bracket on. Then drilled and tapped M10x1.5 in the bracket. I was skimping on material so I drilled a bit of scrap 12mm plate and made a temporary base, bolted that to the bracket and then used a holesaw to cut out the bracket for clearance to the idler body.
Initially he wanted it offset only about 50mm but that would not have left enough meat in the centre and space wasn't that big an issue so 50 became 70. So much aluminium on the mill... Many cleanups.
Yet you have a Cert IV that says you can! Go education! (Don't point out that I also can't weld for shit or how I know, okay...? )News flash: I'm not a welder.
I've got lots of certificates...Yet you have a Cert IV that says you can! Go education! (Don't point out that I also can't weld for shit or how I know, okay...? )