Recent content by Cave Dweller

Drilled two holes in the casing and zipped tied in place. Loop zip tie through the sensor just like you would zip tie the sensor to the chain stay, then feed it in one hole and out the other.

Cannondale In race setup

Calm down people, I'm back.

I had a really annoying click. I changed: Pedal spindles Pedal bearings Changed cleats Changed bottom bracket Re-greased the speedplay pedal numerous times Re-greased the speedplay cleats numerous times Nothing was working. It was also related to temperaure, the noise was louder when...

Given up on road tubeless after 1 1/2 years. Too many flats/torn tires (mostly from rides in the rain). I have not had stans repair even one tubeless flat, its just sprays latex everywhere. Putting a replacement tube in road side is such a pain. The beads are so tight. I have had so many...

Bike: 2004 Turner DHR and 2013 Banshee Spitfire Colour: Black and Polished Raw Date it was stolen: 13th August 2014 Where it was stolen: Wollstonecraft, Sydney, NSW PM me through here is you see them Specs: Bike 1 Turner DHR 2004 black Avalanche DHS rear shock Boxxer races upgraded...

Cool, let us know how it goes.

Not sure which resistance level you would use as this would change the speed to power relationship as you say. Maybe send trainer road an email? The D2R is listed as compatible though. http://www.trainerroad.com/features/virtual-power

Hi Steve, I just saw this post. What I did was to drill a hole through the flywheel and into the inductor ring. I tapped the hole and then threaded in a stud and loctite in place. You may need to grind down the inner and outer ends of the stud, in needs to be flush or it catches on other bits...

I used to get pressure sores. I was running cream, Assos shorts and a SLR super flow saddle. Nothing helped. What made the difference was getting a bike fit. I was sitting too far back and didn't have correct weight distribution. Since putting on a longer stem and sliding the seat forward I...

Nothing like a road bike trip, have fun!

Get boxes from bike shop and box them before you get the airport. Just imagine trying to do this at the airport only to discover the pedal is stuck in the crank arm and you just can't get it off. You just dont need that stress. On the other side just do the same. Distances seem ok. On the flat...

That is a super good deal. I have been really happy with the trainer. If your doing mostly steady state drills (like hold X power for 5 mins) then magnetic is fine.

Glad you had a good time on the ride mtb101 and that someone got to use the ticket. I was really looking forward to improving my previous times but there is always next year. Pistonbroke & casnell, this is the must do road endurance event in Australia. The other one is Fitz 255km Epic in...

On sale for $379 at Torpedo7 again, with free freight as well (I had to pay an extra $80) http://www.torpedo7.com.au/products/YDTRMN3SH/title/d2r-shadow-bike-trainer