Recent content by gregp

  1. G

    VIC Lysterfield Park

    Is there a Demo Day at Lysty this weekend (16-17 Feb)? Or later in Feb? I used to get Demo day info from the LDTR calendar. Right now they are showing nothing for the rest of the month, but I heard Spesh might be doing something.
  2. G

    ESI grips

    Medium hand here (although some of my gloves are Large, depending on brand/model). I use Chunky ESIs and they fit well. I think they're basically close to the "average" size of the mtb grips so it's the best place to start.
  3. G

    New bike, steerer too short.

    Agree with you, except I would not have even left the shop if the steerer was cut like that. Normally they leave 30-35mm spare (max recommended by the likes of Fox for safety reasons - any longer and you have too much leverage on the steerer creating undue stress on the fork and the headset...
  4. G

    Lake Mountain Ride Day

    Does anyone know if their trailers use crank holders, or another mounting system? So I know if I should organise some kind of a prophylactic for my carbon crank arm...
  5. G

    KS Lev Restore

    Degrease the shaft with isopropyl alcohol. Put a glove on (from my experience the generic yellow latex supermarket ones work best, they are soft and sticky), heat up the actuator assembly with a heat gun to soften the loctite (heat it up good) then quickly clamp it in something stationary (vice...
  6. G

    XX1 cassette options

    I was going to suggest mtbdirect - got it from them for tree fiddy maybe a year ago, same price as zee germans. But I've just had a look first to check and nearly had a heart attack: https://www.mountainbikesdirect.com.au/sram-xx1-xg-1199-x-glide-10-42-11-speed-cassette - is this an example of...
  7. G

    Chain reaction cycles

    who are the new shipping mob?
  8. G

    Formula Brake Bleed Kit O Ring Help please

    It's the inside diameter. It's the correct size. Sent from my SM-T700 using Tapatalk
  9. G

    Snakes

    God damn it!!! My worst fear realised! Was going to go to You Yangs on Sat, but literally thought to myself "better not, too warm, Bruce will be out and about", so I went to Lysterfield instead. Thought I was being paranoid... Had two encounters with him last year which pretty much stopped me...
  10. G

    VIC Lysterfield Park

    Never thought I'd see Lysty in the running for Pinkbike fail of the month... http://www.pinkbike.com/news/fail-of-the-month-july-2016.html
  11. G

    Dropper Post offset

    Check where your saddle rails are currently clamped, maybe there's room to slide it back a couple of cm on a non offset post
  12. G

    Buxton and Lake Mountain Thread

    How's the Lake Mtn Granite Grind and the new downhill to the bottom of Lake Mtn Rd after the recent winds? Safe to ride this weekend?
  13. G

    Shimano bleed block width

    If it's this one you're talking about, it's 10.00mm. Have one in the box here, and just measured it for you. https://www.universalcycles.com/images//products/large/41799.jpg
  14. G

    Blur TRc Rear Shock Upgrade

    Hi Jim, did you end up installing the monarch+ debonair on your TRc? What's the verdict? What did SC have to say?
  15. G

    Bearing questions

    http://www.rotorburn.com/forums/showthread.php?299311-Outer-race-bearing-removal
Top