I could be wrong... did Fox have to change the shaft diameter in either the DHX5 or the RC4 to suit the Specialized demo frame as they were snapping?
From 12mm to 14mm?
Also, i'm fairly sure the dhx5 has a slightly smaller shaft diameter than the RC4 so you could have an RC4 retainer clip on there.
Just found out Ti-springs.com are no longer trading... not surprising after their woeful customer service and long wait times or never receiving your goods.
Does anyone know if there's someone else selling shiny bolts and springs?
Trying to help a friend out with a busted wheel, he has a tight budget and needs the following below to get him out on the trails.
Item: 29er 142x12mm rear wheel 6 bolt rotor design and Sram XD freehub. Sealed bearing hub.
Location: Adelaide, postage to be included in price.
Bit of an age old question. BB30 offset chainrings.
I've purchased a Specialized P-Slope and i purchased a set of the long spindle BB30 sram cranks. With DM fitment. This is my first bike with BB30 and ive read a heap about it and have confused myself.
I had a spare GXP 104bcd spider...
If you have any of the below items for sale please send me a private message to discuss. Will require photos for all items.
Item: Rockshox 29er fork, BOOST, 160mm travel, 180mm steerer, Either model charger damper.
Location: Adelaide, postage is required.
Price: Depends on model...
Item: BLACK Thomson Elite or Masterpiece seat post etc. Something of equal quality might spark my interest...
Item Condition: I'd like it to be in good condition, not scratched to hell.
Price and price conditions: You tell me....
Took my front wheel out after doing DH shuttles and thought I put my axle back in the forks, turns out i didn't and must have lost it where I packed up. Drove back after I got home after realizing and searching for it in my car and couldn't find it. So either someone scored an axle or it's lost...
Item: 2011/12 Rockshox Boxxer Worldcups
Item Condition: Used, few scuff marks on lowers.
Crown has a few cable rub marks, doesn't affect the fork apart from aesthetics. Stanchions have a couple of minor nics bit are smooth (pictured). No anodizing wear on stanchions.
Thanks guys for you help, I've sent Mountain Bike Bearing Specialists an email regarding the bearing I'm after. Hopefully hear back early this week.
Having spacers is an option, but not a path I want to go down nor should I have to. They'll be fiddly and the photo below should help explain...
The suspension is stock standard and hasn't been modified.
I could use spacers but fiddly as hell to put them in and not sure if that would void any warranty. I'm already trying to get a bolt under the 5 year warranty for a two month old bike... So don't want to name the brand.
I'm looking to get some suspension bearings to have on hand if I need them and glad I'm looking now.
I've been trying to find a 6902V bearing, where the inner ring has a 1mm offset on one side and 2mm on the other. This make the inner ring wider than the outer and they are becoming a pain to...
Item: After a 11-23t 10 speed cassette,
Price range/Willing to Pay: Depends on condition, cheaper the better
Want to try a closer ratio cassette on the trail rig for some light DH duties.
Want to be able to use a new chain on it so nothing to worn please...