hey i am having trouble keeping the compression in my breaks every time i bleed them they they feel good then they lose there compression once the top cap is screwed back on
any tips on how to fix them will be great
hey guys i have a iron horse yarkuza 2004 model and today i found a crack in the swing arm that goes right around. has any one had this problem or heard off it and how much am i up for on repires.
hey man just to let you no if you use the rite glue which i do it will be hed on there stronger then your pads are when they are new and it is also strong anuff to lift a 3 tone car so i am sure it could stop me
hey yer sorry they are on hyes 9 all you need to do is copy the shape of you bad cut it out with a very sharp knife then sand it down to the right thickness you need then just super glue them on (mack sure you remove the old pad first otherwise it dosent stick probley
hey just to let you no i cut out break bads for my bike out off drum brak bads from a car and the stoping power is awsome you could make around 20 bads from one drum break bad and they have a resonable life span
just to let you no
hey guys i have 888 vf forks on my dh bike and i was wondering if there is any may i can stop them from bottoming out on almost every drop i do (and it is not just me all my mates think they need to be stiffend) also there are alot of metal fillings in the fork oil is that normal.
thanks heaps
hey jarred it would be good to build smaller stuff there even thow i can do all the jumps and stuff thats around therte as long as they dont touch any of the tracks that are already there
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.