Search results

Item: X01 11spd shifter Condition: Never used, removed from new bike Price: $150 firm SOLD

Sold, thanks

Item: X01 shifter, 11spd Details: Don't need clamp, prefer grey Price: Anything fair Location: Bris, happy to pay post

Item: Fox 36 float topcap (spring side), to fit 2015-2018 36 Where: Anywhere, will pay post Price: Something reasonable Details: The threaded part, doesn't matter if there's no blue valve cap

Looking for these in 650b, ideally online with reasonable postage costs. The usual suspects don't seem to have them, and bike24 are out of stock. Thanks

Item: Hayes Prime brake calipers (or complete brakes) Price: Cheap, for an experiment! Location: Anywhere, will pay post

Item: XO 9sp shifter (rear / right hand) Location: Wherever, will pay post

Item: XO 9sp short cage derailleur, might consider 10sp too Details: the one with the carbon outer cage and aluminium inner cage... no medium or long cage pls Price: something reasonable Location: wherever, will pay post

Can someone measure it for me accurately? Preferably a measurement to center of BB both left and right averaged, or lean it against something so it's just on the virge of tipping over towards you. If there's any lean angle it affects the measurement. Also need to know what tyres it's with...

Item: 34t max M970 or M980 XTR cassette or largest two cogs Condition: Will consider any, just be honest Location: Anywhere Not after 32t or XT, already have both.

I've never had a problem with ebay ones before, but decided I should probably think twice before putting them in my stem. However the probolt ones are stupidly expensive and it'd be wasteful if they're actually the same thing. Is there an in-between option where I can be sure they're of...

What: Firm spring for Fox 36 Where: Anywhere, will pay post Details: It has green paint on one spot to signify rate The older springs taper to a smaller OD (and ID) at the ends of the spring, ideally I want a newer one without the taper from a 2011+ fork, but will settle for one with the tapers...

Are these available yet? Integra in particular, I know you can get normal ones. They come stock on the 2015 Kona Process. Black shaft, apparently chicks dig it.

Item: Selle SLR Ti Location: Don't mind, will pay post Price: Let me know Details: They have 135g written on them, actual weight is more like 150, anyway that's the one I want. It has Ti rails, not vanox / carbon / etc.

Item: 2015 Evil Undead Item Condition: Brand New Price and price conditions: Sold Pictures:

What: XTR 10spd rear mech, any model Details: M981 preferred; will also consider M980, M985, M986 Where: Anywhere, will pay postage Price: Something reasonable Condition: Any condition is okay - broken cages or b-links are fine as I have spares.

What: 550x2.0 Ti Spring Where: Anywhere, will pay post Price: You tell me Details: Preferably one of these brands: Progressive DSP Manitou Kronos

Is there an option that'll make quick work of aluminium? The stock fibre cutoff wheels are pretty poor. I figure the EZ-lock mandrel with "metal" wheel would be better, but will it actually make short work of aluminium or will it still take forever to cut while the tool gets really hot...

What: Fox 36 damping cartridge, sealed Details: R or RC2 of any year, invert or not I don't mind. May consider RLC. No OB please. Location: Anywhere, will pay post Price: Depends on what it is

What: Fox RC4 shock - broken / damaged is fine Details: Any size is fine - just need compression adjuster assembly mostly Price: Anything reasonable Location: Anywhere, will pay post