Search results

Item: KS Lev 150x30.9mm with external routing and standard lever Location: Wollongong Item Condition: Excellent used condition Reason for selling: wrong size for new bike Price and price conditions: $200 Extra Info: great post which has worked flawlessly from day 1. Only selling due to...

Item: RS Revelation XX 29er fork 140mm travel, drops to 120mm at the turn of a dial 20mmx110mm MAxle Location: Wollongong Item Condition: Brand new in box, never ridden Reason for selling: Bought for a project which didn't eventuate Price and price conditions: $150ono Extra Info: This fork...

Item: RS monarch plus Debonair rc3 216x63mm. M-M tune. Reason for Selling: db inline. Item condition: Barely used, maybe 10hrs tops. Like new condition except for minor cosmetic installation marks around top eyelet. Price: $350 ono posted Item Location: Wollongong Sent from my SM-G900I...

Item: RS Monarch plus RC3 216x63mm Location: Wollongong Item Condition: Excellent condition; it's had about 10 hours on it. De-stickered, but other than that it's like new, except run in! Reason for selling: DB Inline Price and price conditions: $300 plus postage if required Extra Info...

Item: Burgtec Ride wider 780mm x15mm handlebar brand new Location: Wollongong Item Condition: brand new in box- never used Reason for selling: unrequired prize Price and price conditions: $70 + postage if reqd Extra Info: As mentioned these are brand new in the box, never fitted. 780mm...

Item: Kore Mega AM 27.5" wheelset, 15mm front, 12x142mm rear with XD (11 speed) driver body Location: Wollongong Item Condition: Brand new (OEM) and unused Reason for selling: Came on new bike, I have a set of Derby carbon wheels Price and price conditions: $300 + postage if reqd Extra...

Item: RS Reverb stealth 30.9mmx420mm, 125mm drop; brand new (OEM), never used Location: Wollongong Item Condition: brand spanking Reason for selling: Prefer KS LEV integra Price and price conditions: $250 Extra Info: Came stock on my new bike, but I'm a KS fan so this was never installed...

Item: DT Swiss EX1750 26" wheelset; 240 Hubs laced to XR5.1 rims with DT Revolution bladed spokes. 20mm front, 12x142 or 12x135 rear. Rear hub has the 36tooth ratchet upgrade Location: Wollongong Item Condition: Very Good; hubs are pretty much perfect and will go forever. Front rim has a few...

Item: Syntace W35MX 26" wheelset Location: Wollongong Item Condition: Front- excellent; rear very good Reason for selling: moving to 27" Price and price conditions: $800 now $700 Extra Info: "Pinkbike's best of" award for 2012; super wide (35mm) wheels to give your tubeless tyres better...

Seems like there's now a few independent groups of trail fairies around Bulli, doing some excellent work of rebuilding/repairing/rejuvenating the existing trails; great to see. Imagine what we could achieve if we pooled our resources and worked together on the "master plan"! I'm not talking...

Would-be trail fairies- Please do not modify (read: dumb down) trails in the Bulli area, or anywhere else for that matter. Most trails in this area have been around for 10-20 years, and are regularly ridden (often in both directions). Difficult sections (almost) always have a B-line already...

Just a quick reminder that, despite having been around for quite a few years, all of the trails in the Illawarra area are unofficial, and as such drawing attention to them is an absolute no-no! Recently I had to remove several hundred metres of black/yellow marking tape which had been strung...

Item: Fox 36 TALAS RLC 2011 Tapered Steerer Location: Wollongong Item Condition: Very good, few cosmetic scratches only Reason for selling: No longer need TALAS Price and price conditions: $520 + post Extra Info: Tapered steerer is 195mm. Recently serviced and seals upgrades to new SKF...

Item: Avid Elixir CR brakes + 185/160mm rotors + adaptors + Matchmaker clamps + X9 10spd shifters Location: Wollongong Item Condition: Carpark ridden only Reason for selling: I'm a Shimano man Price and price conditions: $350 incl postage Extra Info: Came off a bike bought for parts...

Item: XTR 980 10-speed rear derailleur (current model) long cage Location: Wollongong Item Condition: Lightly used, excellent condition Reason for selling: Switched to mid cage Price and price conditions: $100 incl postage Extra Info: Bought as part of a complete (2nd hand) groupset. Was...

Item: Mongoose Teocali Super; unridden 2009 frame, custom parts. Location: Wollongong Item Condition: Frame new, parts used but excellent great condition. Reason for selling: Came into some cash, going to 160mm bike. Price and price conditions: $2000 Extra Info: Check out the specs below...

Hi All, Currently I have a 10spd XTR cassette, chain, rear mech and rear shifter (1x10). I want to go to 2x10; I am running xtr 970 (9spd) cranks. Will be running 24/36 on the front, would like (if possible) to run an XTR front shifter but need an e-type front mech, ideally 2-ring specific...

Item: Truvativ Stylo World Cup alloy riser bar 620mm width x 25mm rise Location: Wollongong Item Condition: Brand new, unused Reason for selling: unwanted prize Price and price conditions: $50 incl. post Extra Info: not much to add, really. Top spec alloy riser bar perfect for XC use...

Item: Da Bomb 36h front on 20mm Da Bomb headspin, Da bomb 36h rear on Axiom SS 10mm bolt up Location: Wollongong Item Condition: Used, but pretty damn straight, no cracks or dents. Reason for selling: Don't use them Price and price conditions: $150 for the pair, plus post Extra Info...

HI all, just a quick one (I hope). I've got a DT 240 front hub which I will sometimes need to swap from 15mm-20mm. The endcaps appear to screw into the hub, so I can easily undo one of them, but how do I stop the axle from spinning so I can undo the second one? :confused: