Item: 2022 Rockshox Lyrik
Wheelsize: 29”
Offset: 44mm
Travel: 170mm or min 160mm
Spec: Can be Select, Select+ or RC2
Steerer: Tapered 1-1/8 -1.5”
Steerer Length: 180mm or more
Colour: Black
Condition: Must be VGC, no marks on stauncions
Price: Well ..new is $1100 so much less than that...
Hi everyone
Would like to know if the screw in fitting of the M520 caliper/hose would screw into the Saint caliper.
Trying to get out of running the Saint hose through the frame internally PIA…and just *bolt them up using the M520 hose
I’m not liking the rhs AXS shifter (paddles) for the derailuer…i’ve tried the stock and accessory paddle and both feel awkward, ironically the stock version is a little more to my liking…but….
Was thinking of using the lhs AXS dropper controller as a shifter….anyone done this yet
Is the...
Item: Raceface Next SL Carbon Crankset
Weight: All inclusive 518g
Length: 170mm
Chainring: RF NW 32t
BB Type: Normal thread in 68-73mm width
Condition: Excellent, bearings like new, no knicks or rubs...only used on a gravel grinder...
Bonus: Will include RF spanner for the BB cups
Price: $350...
Item: 2012 Santa Cruz 29r Highball Carbon frame
Size: Medium
Rear Axle: 12 x 142mm
Weight: 1257grams
Condition: VGC, been covered in frameskin and only used with CX tyres as a gravel grinder.
Includes: Cane Ck headset, spece Woodman seat clamp and light weight DT Swiss bolt thru axle.
Location...
What: Shimano XT/SLX/Deore Cranks (no boost)
Type: Hollow Tech 2 Bottom Bracket
Arm Length : 170mm
Ring Type: Chainrings not required but a Triple version with 104bcd in middle ring is (running 1x)
Colour: Black or Gray...not Silver
Condition: Good, not too scratched up
Price: 70-80 dolls...
Item:* Forks.... Fox or Rockshox
Wheel Size: 26"
Axle: 9mm QR
Steerer: 1-1/8th inch
Steerer Length: 190mm
Travel:b] 130 to 150mm range
Condition: Working order....tidy????
[b]Story:*Getting a 26"er back on the trails for my young nephew...
PM me and puts some pics in this thread....
Item: Salsa Lip Lock Seatpost Clamp (not the QR version)
Size:* 35mm or as we all know it 34.9mm
Colour:* Black...may consider silver...
Condition: VGC
PM me.....
What: SC Bronson CC
Type: 2013/2014/2015 Version 1
Size: Medium
Build: Complete or frame only
Condition: Not f*cked up, so vgc!
Contact: via PM
Pics: Hell yeah
Area: SE Qld
Anyone used Paint My Bike business in Briso...considering buying a frame and having the gloss paint job removed back to the original carbon.
Looking for feedback on the process and costs...or negative experiences.
Looking to size up a Large Bronson Version 1 to see how it fits....looking to go up a size and run a super short 35mm stem.
If you are in Toowoomba Qld area and can help let me know.
John
Ready for the winter Enduro series or the trail rider wanting an awesome singletrack slayer....built to do either.
A high end build with many components only 6 months old, very light on the pedals at approx 25.5lbs/11.5Kg....throw on an XC wheelset and you could do that too at near 23lbs...
What: Swap or trade my Highball Carbon frame for a Tallboy Carbon
Size: Medium
Colour: Black/Gray...stealthy
Condition: VGC
Axle: Highball has 142x12
Headset: CCk 110
Location: SEQld for the logistics
Photos: There's a pic or two somewhere here on RB, search my threads.
PM me to discuss.
Having not ridden a steel frame since I was a BMX kid and only ridden alloy/carbon mtnbikes as an adult, I've long lost the feel or maybe never "felt" the compliance assosciated with a steel frame of my youth?
So as a creaking old bloke I ask for some feedback as to how a change of frame...
Item: Widgit Chainring
Size: 28/30/32t
To Fit: standard granny 64 or middle ring 104 BCD cranks
Colour: Any
Price: free or not much, for the loaner bike...
Postage: I will pay if it's free...
PM to deal!!!
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.