Search results

In the off chance someone has one laying around. Installed some forks on a mates Polygon. 140 -> 180mm travel is too much lol. Item: As per title. Location: Tas or post. Price range/Willing to Pay: Less than new. Extra Info: Also after 29" lowers for said fork.

Item: 29" Raceface ARC30 on ZTTO M1 front, Goldix GDX370 rear (DT Swiss 350 clones). - Front: 110x15 6 bolt - Rear: 12x148 6 bolt, 36t ratchet, Microspline driver (might have XD around somewhere) - Pillar PSR TB2018 spokes rear, DT Swiss Comp front, brass nipples, built up with Wheel Fanatyk Fix...

Item: Shimano MT520 (4pot) on MT501/MT500 levers, front & rear Location: NW Tas Item Condition: Good Reason for selling: Upgraded Price and price conditions: $100 sold Extra Info: Off a size large 2020 Trek Rail, will need a bleed Pictures: Will grab some after work

Item: Burgtec Ride Wide 35mm alloy bars, 800mm, 22.5mm rise Location: NW Tas (can post - $18) Item Condition: 2 rides on them before I went to OneUps Reason for selling: See above. Price and price conditions: $80 Pics:

Item: 2020 Yari RC (MC damper) - 29", Boost, 160mm, 44 offset, Debonair, eMTB oversized crown. 185mm steerer. Location: NW Tas or posted Item Condition: A bit rough externally, but perfectly functional, see pictures. Marks on stanchions are smooth & haven't caused issues or wear on the...

Bit of a long shot, but anyone have as Smashpot topcap for a Fox 36 Rhythm or Marz Z1 (is that even something that exists?) laying around? Can swap for Lyrik/Yari or Pike/Revelation Item: Smashpot top cap for Fox 36 Rhythm or Marz Z Location: NW tas or post Price range/Willing to Pay: ? Extra...

Anyone have one of these floating around? Item: Trek Knock block steerer clamp Price: Cheaper than new, other than that you tell me? Extra: looks like this

Item: 2017 Ibis Ripley LS (ex-Tubbsy), 130F/120R travel, 29er, size XL (closer to L nowadays). For reference i'm 6'2" / 187cm & i'd call this a good fit. Location: NW Tas. Can probably ship, but likely to be $$ ($200ish) Condition: Great. Few surface marks on the frame. Price: $3200 $3000 SOLD...

Item: XTR M9100/9120 crankset 175mm - no chainring. Location: NW Tas or post Item condition: Used but pretty good. Some shoe rub on the outside & frame rub on the inside + chain slap on the drive-side. Have recently been re-heli taped. Price: $250 sold Extra info: Went to a shorter crank Pics: Yes

Item: 2021 Norco Sight A frameset, 29", Large, with Super Deluxe Select+ shock Location: NW Tas, can post Item Condition: Overall very good - has some very minor rash down LH side of downtube & on rocker link, plus small chip in the paint closer to BB - see pictures. Small superficial dent in...

Item: Time ATAC XC6 pedals + cleats Location: NW TAS / Posted Item Condition: 2 rides old Reason for selling: The extra float is not for me Price and price conditions: $80 sold Extra Info: Shame I don't get along with the lateral float, really liked the engagement/release. Pictures:

Item: 2022 Fox DHX Factory coil shock - 185x55mm Trunnion Location: NW Tas/Post Item Condition: Excellent, not much use Reason for selling: No frame to match, was on a Norco Sight A1. Price and price conditions: SOLD Extra Info: Bought from Cyclinic 22/6/2021. Have Cane Creek VALT 500-610lbs...

Item: 2021 29" Lyrik Ultimate RC2, 42 offset, 170 travel. 162mm steerer (because i'm a dunce & didn't measure adequately) Location: Tas/posted Condition: Excellent. One tiny mark on stanchion from unfortunate storage incident. polished flat/filled with nail polish, can't feel it with a finger...

After some very basic/cheap bars and a stem for a little dude's bike - the 500mm bent things currently on there aren't ideal. Item: >650mm bars, 0-20mm rise or so, plus 40-50ish mm stem Location: Tas/posted Cost: Less than the cost of my second option, aka Brand-X bars/stem for $60. Extra...

No longer need these. 216.6g for a solid bar/stem combo for the XC folks. Item: TUNE Flatbar Turnstage Lowriser 2.0 UD Carbon 31.8, 750mm wide (20mm rise, 9° backsweep, 6° upsweep) Location: Tas/posted Item Condition: Excellent Reason for selling: Wanted/needed wider & tougher for jumps & poor...

Long shot, but based on initial quotes from CNC machining/fabrication shops, getting a one off isn't going to be favorable cost-wise. Anyone with access to tooling required (band saw, drill press?) able to cut or machine the below out of 10mm alu stock? Item: Custom post mount adapter Price...

Item: Offset 8mm shock hardware/bushing, 22mm 21.8mm width Condition: Functional Price: Less than a new Burgtec one off MTBD? Location: Probably posted. Bought some from offsetbushings.com. Cheers wkkie.

Item: 2021 SID Select+ 35mm 29" - 120mm travel, 44 offset, boost, 180mm steerer Location: Tas or post ($20) Condition: Excellent Price: $700 - sold Reason for sale: 120mm on a Ripley not enough - just bought some 2022 Fox 34s. Extras: Threaded for OneUp EDC. Pictures:

Item: 29" Hunt XC Wide front/rear, 100x15, 142x12 non-boost, 6 bolt, XD driver, 25mm internal, 1650g Location:NW Tas or posted Item Condition:Used but decent. Few scrapes here and there, bearings rolling smooth. Reason for selling: Boost frame, new wheels Price and price conditions: $250 SOLD...

Now that customs have finally decided there wasn't Peruvian flour packed in the frame, can finally get things rolling. Currently still waiting on AusPost to get stuff over the strait, and RockShox to warranty Lyrik (creaky CSU). Proposed parts list (swapped off existing Norco Sight): Frame...