mty10@
Likes Bikes and Dirt
You're not talking loud. That's just talking big.THAT'S NOT LOUD. It's just you talking in a different colour.
Sent from my SM-G930F using Tapatalk
You're not talking loud. That's just talking big.THAT'S NOT LOUD. It's just you talking in a different colour.
how do we know its NOT BOTH issues occurring simultaneously?!No. Clearly I need to say it a bit louder.... The problem is the cassette that's outside the design specification of the derailleur.
Cos the alignment block is 110% in the right spot. It's not my first rodeo, just my first on more than 9spdhow do we know its NOT BOTH issues occurring simultaneously?!
........it would be one for the fuckwits thread thats for sure
ok pardner...Cos the alignment block is 110% in the right spot. It's not my first rodeo, just my first on more than 9spd �� ��
Sent from my SM-G930F using Tapatalk
I'm going for the spokey-doke effect.ok pardner...
also dont forget to trim your mech cable cause its fouling with your spokes
:rofl: ..................I'm going for the spokey-doke effect.
Quantity > Quality3 pages in, when it only needed a single reply. Just sayin.
And you've replied four times. Just sayin.3 pages in, when it only needed a single reply. Just sayin.
Eh, I'm out of area and can't update on result. I figured replying would stop the bloat . I guess not.And you've replied four times. Just sayin.
3 about the topic. 2 of those on same point. I blame wiggle.And you've replied four times. Just sayin.
Yep, if we didn't have reply 2,3 and 4, then 1 reply would have been sufficient.....3 pages in, when it only needed a single reply. Just sayin.
Hey, it's bold, so it's a bit louder. :director:THAT'S NOT LOUD. It's just you talking in a different colour.
I ran mine with a 40T no problem didn't need goat link or extended b screw.Unlikely to solve it, just move the problem. Might gain clearance for the cable arm, but then the top jockey wheel won't clear the sprocket. Shimano 10-sp. derailleurs are only designed for a maximum sprocket of 36T; anything bigger introduces the probability for the problem the OP is having.
I tried twice. Once with Zee, once with XT middy, neither worked for me with a 40t (my boys 2 bikes). One is now goat linked, one rad caged.I ran mine with a 40T no problem didn't need goat link or extended b screw.
Think we all wait with bated breath for the OP to release the details of his findings lol
I used an XT mid cage. Didn't even have to wind the B-screw all the way (was close though) and it worked fine with 11-40.I tried twice. Once with Zee, once with XT middy, neither worked for me with a 40t (my boys 2 bikes). One is now goat linked, one rad caged.
I keep hearing some people got it to work, not me. Are you sram?