Freecoaster halp.

[Deleted member 18757]

Does anyone have the video on how to greese a freecoaster? And what should I use to greese it? Its starting to click so I better greese it. Thanks, any help appreciated.

Edit: I have a federal.

 

[julianwisbey]

the instructions are on the khe site arent they ?

 

[Deleted member 18757]

Don't think so. I went into tech support and the only had

1. Spoke Length
2. Changing hub bearings
3. Folding tire treatment
4. Adjust freecoaster gap
5. Warranty policy

 

[DANCLOSH]

yip yip
How to dismantle and re-assemble your federal freecoaster

 

[Deleted member 18757]

I can't get the driver off The link sais "Take the driver out by pulling it out and turning Anti-Clockwise at the same time. (It can be a bit stiff)"
Is that correct?

 

[DANCLOSH]

one would think so

 

[rhysrhysbaby]

The drivers can be real pains to get off especially if they aren't greased up.
Pull quite hard whilst twisting the driver and also hold the axle so it all doesn't keep spinning.
Patience is the key.

 

[xero]

* If the driver is stuck in the bearing , use a tool to gently lever it up a little.

Should be the same with the Federal.... they are after all just a copy of the KHE

 

[Deleted member 18757]

Okay... went down to my LBS and asked them 2 remove the driver, and they couldnt so they just removed the axle. Thanks for the help anyway.

 

[Belle]

Just sand the axles ends down slightly

mine where burred so the driver couldn't come of.