Miguel75
Likes Dirt
When bleeding my V4's, I use two of the Birzman tyre levers (pics below) as a bleed block. The diamond shaped cut out corresponds to diamond shaped pegs on the opposite side and allow them to be stacked. Two of them stacked are approx. 11mm thick and give me a great feel on the lever.I used to use an M820 bleed block but prefer the feel the Birzman option gives.
EDIT #2. I use the Hope bleed process detailed here;
This one: https://enduro-mtb.com/en/how-to-bleed-hope-tech-3-lever-and-e4-calliper/
This is the new bleed kit method:
EDIT #2. I use the Hope bleed process detailed here;
This one: https://enduro-mtb.com/en/how-to-bleed-hope-tech-3-lever-and-e4-calliper/
This is the new bleed kit method:
Last edited: