floody
Wheel size expert
Prefer early model, twin cartridge, bolt-on arch one, but the later ones with the one piece lowers would be cool too.
Or, Judy SL's, only the bolt on arch model though.
Or Manitou Palmer FS Ti (they were green, 80mm travel, rare..), I'd really like to get my hands on a set of these, but, MUST have good crown and stanchions they were a problem back then with all the mach5 style forks.
Must be in working condition, not too much slop or damage to the stanchions.
Also just about any other useable old-school DH stuff (pre say 1997, 1998 at the latest) I'd be interested in hearing about.
Especially:
-A set of straight Mavic 121 SUP wheels...yeah pushing it I know
-50-80mm old style Kore stem, yellow or red (controltech in same size would rock too), 1 1/8 aheadset
-unbent Tioga revolver cranks with good tapers and spider (always loved them)
-small (e.g 16" or smaller) Yeti XC hardtail frame, one of the old yellow/blue FRO or ARC's would be cool, up to about 1996 model...
-ORIGINAL shimano DX flats, in good condition
-Bullet Bros tensioner (the one that went on the back axle with a spring down to the bottom derailleur pulley), in good nick inc spring.
Just about any OLD high end stuff, especially DH oriented.
Come on, whos got some prehistoric stuff in the shed...
Or, Judy SL's, only the bolt on arch model though.
Or Manitou Palmer FS Ti (they were green, 80mm travel, rare..), I'd really like to get my hands on a set of these, but, MUST have good crown and stanchions they were a problem back then with all the mach5 style forks.
Must be in working condition, not too much slop or damage to the stanchions.
Also just about any other useable old-school DH stuff (pre say 1997, 1998 at the latest) I'd be interested in hearing about.
Especially:
-A set of straight Mavic 121 SUP wheels...yeah pushing it I know
-50-80mm old style Kore stem, yellow or red (controltech in same size would rock too), 1 1/8 aheadset
-unbent Tioga revolver cranks with good tapers and spider (always loved them)
-small (e.g 16" or smaller) Yeti XC hardtail frame, one of the old yellow/blue FRO or ARC's would be cool, up to about 1996 model...
-ORIGINAL shimano DX flats, in good condition
-Bullet Bros tensioner (the one that went on the back axle with a spring down to the bottom derailleur pulley), in good nick inc spring.
Just about any OLD high end stuff, especially DH oriented.
Come on, whos got some prehistoric stuff in the shed...
