Cardy George
Piercing rural members since 1981
It looks like they've been ridden into a wall and bent the forks under. Hard pass, thanks.
It looks like they've been ridden into a wall and bent the forks under. Hard pass, thanks.
Possible, should be a bit slacker with the old monsters, about four inches slacker.It looks like they've been ridden into a wall and bent the forks under. Hard pass, thanks.
Send that BB up to the moon !Possible, should be a bit slacker with the old monsters, about four inches slacker.
I don't think you baby boomers understand the beauty of the older stuff.
Baby Boomer. That's cute.I don't think you baby boomers understand the beauty of the older stuff.
Back when men were men and rear shocks were just metal bars. Chainless FTW though!Baby Boomer. That's cute.
No. It’s a 125mm frame, already high in BB. You’ll have awful geometry for 3 minutes till the headtube snaps.Possible, should be a bit slacker with the old monsters, about four inches slacker.
I don't think you baby boomers understand the beauty of the older stuff.
Boosting to the max broSend that BB up to the moon !
It's only the 175mm one so should be all good.No. It’s a 125mm frame, already high in BB. You’ll have awful geometry for 3 minutes till the headtube snaps.
That was just how we rolled.It looks like they've been ridden into a wall and bent the forks under. Hard pass, thanks.
I would certainly be interested in any parts, I reckon this bike is a keeper for sure. Hit me with a price. That fork would be sweet tooAhh the old Norco VPS1, my first MTB!
I think I still have some stock linkage plates and a mech hanger + possibly pivot pins if you want them safreek.
Mine died after a shuttle Day at Long Gully. Massive crack in the monocoque between the BB and linkage pivot!
Also, your shockie looks much bigger than mine, any idea what size you were runningAhh the old Norco VPS1, my first MTB!
I think I still have some stock linkage plates and a mech hanger + possibly pivot pins if you want them safreek.
Mine died after a shuttle Day at Long Gully. Massive crack in the monocoque between the BB and linkage pivot!
Will be stamped on the crown, from memory.New photos of the bike in first post. Many photos. Shall have a look at the Z1 and see if I can determine a year.
Raceline was part of Avanti anyway.Definitely avanti moto they have more square shaped seat tube off the main frame norcos where more oval. same shit end of day made in Taiwan by kinesis I believe I have about 5 or 6 off these in my collection and plenty of spare linkages and rear stays. Early racelines where made in the same factory and had identical rear ends
Pretty sure twin disc mounts where 97Will be stamped on the crown, from memory.
I can’t be sure of that but does sound about right. Mine were 98, only one.Pretty sure twin disc mounts where 97
Either way thats before my time dont think i hit puberty yet in 97I can’t be sure of that but does sound about right. Mine were 98, only one.
I was 26...so, neither had I.Either way thats before my time dont think i hit puberty yet in 97