VIC Part out! 26" wheels, shock, fork, etc.

yiannos18

Likes Dirt
Item: 2012 26" Fox 32 Talas QR15 w/ 2017 CTD FIT upgrade
Location: Eltham, VIC
Item Condition: Used
Reason for selling: Need money
Price and price conditions: $250 (SOLD)
Extra Info:
Had new uppers installed in October 2014 with a standard 1/2"-1 1/8" steerer compared to the OEM Giant OD2 steerer. Rebuilt in November 2016 with 2017 CTD FIT internals and refreshed the Talas. Has done less than 100 hours since. Uppers don't appear to have any scratches.
Pictures:




Item: 2012 Fox Float Factory (Non-Kashima) RP23 (184 x 44mm??)
Location: Eltham, VIC
Item Condition: Used
Reason for selling: Need money
Price and price conditions: $150
Extra Info: Will include the "XV" air can. Like the fork, it was rebuilt in November 2016 with new seals and shims. Done less than 100 hours. Has been re-tuned to have a more solid "3" setting to give a firmer pedal platform, but apparently, all 2012 models suffered from a not super stiff pedal platform.
Pictures:


Item: Shimano Zee M640+ Rear Derailleur
Location: Eltham, VIC
Item Condition: Used
Reason for selling: Need money
Price and price conditions: $40
Extra Info: Great short cage RD with a super strong DH clutch, been running 1x10 with no issues whatsoever and the short cage design means it stays tucked up out of the way of any rogue sticks and rocks. Was used on a 125mm Giant Trance with no issues regarding anti-squat. Wide ratio (32-36).
Pictures:


Item: 26" Shimano XT M785 UST front wheel
Location: Eltham, VIC
Item Condition: Used
Reason for selling: Need money
Price and price conditions: $100 (SOLD)
Extra Info:
QR15 thru-axle. Bearings still run freely, minimal drag. Will come with 180mm XT Ice-Tech centrelock rotor and tubeless valve. Simply add sealant (or if your tyres are very airtight, just mount them) and go! (Tyre sold)
Pictures:

Item: 26" Shimano XT M785 UST rear wheel
Location: Eltham, VIC
Item Condition: Used
Reason for selling: Need money
Price and price conditions: $85 (SOLD)
Extra Info:
Standard 135mm quick release rear hub. Bearings still run freely, hub could be refreshed if you so wish, but no need as they run fine. May need to be trued? But ran straight from what I could see. Will come with (SLX centrelock rotor: SOLD) 10sp XT cassette that has covered about 400km.
Pictures:


Item:
2012 Giant Contact Switch 1 Dropper (100mm)
Location: Eltham, VIC
Item Condition: Used
Reason for selling: Need money
Price and price conditions: $100
Extra Info: Rebuilt in November 2016 with new internals. Some scratches on the shaft but doesn't impact perfomance. Accepts standard round seat rails and will come with the awesome Raceface Turbine dropper lever that mimics the action of a shifter. Suitable only for 1x setups.
Pictures:



Anything else from this, just ask:


(EDIT: Photo links don't work for some unknown reason, here is the link to the album instead - https://photos.app.goo.gl/4CDcoVFiIZlNUph12 )

(EDIT 2: I give up trying to embed photos, just not working)
 
Last edited:

Plankosaurus

Hydraulic Jack specialist
If they are 170, and moorey's not snapping them up, then I'll grab them for sure.

Sent from my E5823 using Tapatalk
 

Haakon

veni, vidi, volanti
Frame? Size...? Mate of mine needs a large bike and his old 26er Reign is too small for him. He is budget constrained and looking for a frame to swap bits onto...
 

moorey

Pagophagic
Frame? Size...? Mate of mine needs a large bike and his old 26er Reign is too small for him. He is budget constrained and looking for a frame to swap bits onto...
What size is his reign that’s too small, is the question....
 

deano

Likes Dirt
Frame? Size...? Mate of mine needs a large bike and his old 26er Reign is too small for him. He is budget constrained and looking for a frame to swap bits onto...
Slight hijack but if there is no frame here I have a 2013 large reign frame that may suit your mate, let me know if interested

Sent from my Moto G (4) using Tapatalk
 
Top