NSW PIVOT MACH 4 sold

onedollarodent

Likes Dirt
For sale in Sydney, a complete MEDIUM pivot which is circa 2012. For $950 ONO.

WHEELS: Chris King hubs on XM819 tubeless wheels. Fresh Schwalbe and Maxxis tyres, not used much.

SUSPENSION: Fox f series 110mm w fox float rp23.

DRIVE: 10 speed on SRAM XX front derailleur (39-26), SRAM XX rear derailleur (10-34). SRAM XX carbon cranks

BRAKES: Magura MartaSL with 6" rotors

OTHER: Thomson carbon bars (720mm), Ritchey carbon seat post, fizik seat, fsa headset, odi grips.
 

Attachments

Last edited:

pink poodle

Clinically Inane
Any chance the front wheel can be converted to 110x20? What steerer is the fork and the frame set fork?
 

onedollarodent

Likes Dirt
Hey - so the front hub serial is a 171xxx and according to the CK website (link) you can convert it into 110x20 using some axle kit and clamp. The hub shell is an LD variant. I am no authority on axle kits, so you'd have to follow up with CK directly. For completeness, the rear hub serial is 162xxxxxx.

The steerer is 1 1/8 top and bottom - fork and frame. The fork spacing is 100x15 QR
 

pink poodle

Clinically Inane
Hey - so the front hub serial is a 171xxx and according to the CK website (link) you can convert it into 110x20 using some axle kit and clamp. The hub shell is an LD variant. I am no authority on axle kits, so you'd have to follow up with CK directly. For completeness, the rear hub serial is 162xxxxxx.

The steerer is 1 1/8 top and bottom - fork and frame. The fork spacing is 100x15 QR
Cheers dude.
 
Top