Sold SOLD: Dvo emerald 26inch

[Lucaw]

Item: dvo emerald 26 inch 200mm dh fork
Location: Hobart or post
Price: $500? They seem to be going for a lot more than that on ebay, but happy to
negotiate
Now $400
Item condition: fully functional. 2 small marks on the stantion as shown in pictures.
Reason for sale: bought an incomplete s-works demo with the hope of finishing it, but it will need more work than I expected so I’m going to part it
Extra info:
20x110 axle spacing, 180mm tapered steerer
Comes with Renthal dm stem

 

[moorey]

2 small marks on the stantion as shown in pictures.

You call those ‘small marks’?
He he, I bet you reply without seeing this.

 

[Oddjob]

@safreek this is the spiritual successor to the Marzocchi Shiver. It's less flexy than most USD forks as well.

Sent from my M2012K11AG using Tapatalk

 

[safreek]

@safreek this is the spiritual successor to the Marzocchi Shiver. It's less flexy than most USD forks as well.

Sent from my M2012K11AG using Tapatalk

Could of considered but tapered, also crypto is down so money must go there. Obviously I have my priorities wrong for a Mtb site

 

[pink poodle]

First you get the money...

 

[safreek]

First you get the money...

Then you get the bike

 

[pink poodle]

Tony knows what's up.

 

[ForkinGreat]

Item: dvo emerald 26 inch 200mm dh fork
Location: Hobart or post
Price: $500? They seem to be going for a lot more than that on ebay, but happy to negotiate
Item condition: fully functional. 2 small marks on the stantion as shown in pictures.
Reason for sale: bought an incomplete s-works demo with the hope of finishing it, but it will need more work than I expected so I’m going to part it
Extra info:
20x110 axle spacing, 180mm tapered steerer
Comes with Renthal dm stemView attachment 388265View attachment 388266View attachment 388267View attachment 388268

Wow, the star nut looks to be held together by rust. pushing it out the bottom of the steerer (& binning it) and giving the inside of the steerer a bit of a clean wouldn't go amiss. GLWS

 

[Lucaw]

Wow, the star nut looks to be held together by rust. pushing it out the bottom of the steerer (& binning it) and giving the inside of the steerer a bit of a clean wouldn't go amiss. GLWS

Just had some dirt and grease in it

 

[Miguel76]

Does it have clearance to run 27.5?

 

[Lucaw]

Does it have clearance to run 27.5?

I doubt it. This is with a 26

I believe you can get these in 27.5, so maybe you only need to get another set of guards and braces?

 

[Miguel76]

Thanks mate. I remember ATC in Bright had an Intense 951(?) in grey with green bits and these forks. It was my dream bike for quite a while…

 

[Miguel76]

And DVO is out of stock on just about every fork and shock parts

 

[moorey]

I doubt it. This is with a 26View attachment 388476
I believe you can get these in 27.5, so maybe you only need to get another set of guards and braces?

Looks like fair clearance to me. More than 26” Fox that will usually squeeze in a 27.5.
You must have a 27.5 wheel floating around to test?

 

[moorey]

Looks like fair clearance to me. More than 26” Fox that will usually squeeze in a 27.5.
You must have a 27.5 wheel floating around to test?

Google disagrees…..but at least I learned it’s meant to be pronounced Devo…..the more you know.

 

[pink poodle]

Google disagrees…..but at least I learned it’s meant to be pronounced Devo…..the more you know.

But now way are their helmets Australian standards approved.

 

[moorey]

But now way are their helmets Australian standards approved.

View attachment 388485

Course not. DVO emerald helmets protect your face but leave your skull exposed.

 

[Lucaw]

Price drop- $400

 

[Lucaw]

SOLD on gumtree