Item: Santa Cruz Bronson V1
Location: Melbourne (Glen Iris)
Item Condition: Good
Reason for selling: New ride
Price and price conditions: $2750 ono
Extra Info:
Just had bearings and shock bushes replaced by Summit Cycles.
Can swap out tyres from here and shock from here if requested, DBAir is amazing for gravity trails, Fox Float makes the bike feel more XC.
Pick up only.
Usual paint chips/scratches that you'd expect from a used bike although I've had the top tube and certain other parts of the frame wrapped to protect it.
I've only had one stack but unfortunately it landed on the front derailleur guide which broke it but who runs two by now anyway?
Pictures: Yes see below
Frame: Santa Cruz Bronson V1 – LARGE (I'm 5'10 and fits me fine)
Forks: RockShox Pike RTC3 650b 150mm (Just serviced lowers)
Rear Shock: Fox Float CTD Evolution (Can supply CCDBA CS for $200 extra)
Seatpost: Bikeyoke Revive 125mm
Saddle: Fabric Scoop Shallow Saddle - Black/Black - Elite - Cr-Mo
Headset: FSA something (replaced the bearings at xmas time)
Wheels: Stans Flow MK3
Spokes: DT Swiss
Hubs: Hope Pro4 650b w/- 12x142 rear axle / 15mm front
Tyres: Maxxis DHF 3c 2.3, Maxxis Aggressor 2.3 (Can swap out for these if requested)
Handlebars: Nukeproof alloy 780mm
Stem: Kore 50mm
Grips: ODI Troy Lee
Shifter: XT M8000 11 speed bar clamp
Brakes: Shimano XT - Silver m785
Rotors: XT 203mm ice tech , XT 180mm ice tech rear
Cranks: XT M8000 170mm,
Bottom Bracket: Shimano
Rear Derailleur: Shimano XT Clutch M8000
Cassette: XT M8000 11-46 (BRAND NEW)
Chain: Shimano (BAND NEW)
Pedals: Can supply some old ones if needed
Pics:
More/larger pics here
Location: Melbourne (Glen Iris)
Item Condition: Good
Reason for selling: New ride
Price and price conditions: $2750 ono
Extra Info:
Just had bearings and shock bushes replaced by Summit Cycles.
Can swap out tyres from here and shock from here if requested, DBAir is amazing for gravity trails, Fox Float makes the bike feel more XC.
Pick up only.
Usual paint chips/scratches that you'd expect from a used bike although I've had the top tube and certain other parts of the frame wrapped to protect it.
I've only had one stack but unfortunately it landed on the front derailleur guide which broke it but who runs two by now anyway?
Pictures: Yes see below
Frame: Santa Cruz Bronson V1 – LARGE (I'm 5'10 and fits me fine)
Forks: RockShox Pike RTC3 650b 150mm (Just serviced lowers)
Rear Shock: Fox Float CTD Evolution (Can supply CCDBA CS for $200 extra)
Seatpost: Bikeyoke Revive 125mm
Saddle: Fabric Scoop Shallow Saddle - Black/Black - Elite - Cr-Mo
Headset: FSA something (replaced the bearings at xmas time)
Wheels: Stans Flow MK3
Spokes: DT Swiss
Hubs: Hope Pro4 650b w/- 12x142 rear axle / 15mm front
Tyres: Maxxis DHF 3c 2.3, Maxxis Aggressor 2.3 (Can swap out for these if requested)
Handlebars: Nukeproof alloy 780mm
Stem: Kore 50mm
Grips: ODI Troy Lee
Shifter: XT M8000 11 speed bar clamp
Brakes: Shimano XT - Silver m785
Rotors: XT 203mm ice tech , XT 180mm ice tech rear
Cranks: XT M8000 170mm,
Bottom Bracket: Shimano
Rear Derailleur: Shimano XT Clutch M8000
Cassette: XT M8000 11-46 (BRAND NEW)
Chain: Shimano (BAND NEW)
Pedals: Can supply some old ones if needed
Pics:
More/larger pics here
Last edited:
