Sold Sold.

wkkie

It's Not Easy Being Green
Item: 2018 Dartmoor Blackbird XL, 160mm travel.
Location: Geelong.
Item Condition: Used, cosmetically not great, fully functional.
Reason for selling: No longer required.
Price and price conditions: $700 the lot. Pickup / Rotorburn courier preferred, but can negotiate postage if needed.
Extra Info: See below.
Pictures: Below. The frame is still a little dirty. I didn't give it a great clean up...

Throw in your favourite fork (160-170mm 27.5 or even 150mm 29), your favourite brakes, dropper if you like and pedals and your good to go.

I do also have options for a non boost 27.5 front wheel with boost kit ($50 extra) or 29 boost front wheel ($100 extra). Let me know if you want more info on those.

Frame - 2018 Dartmoor Blackbird XL.
Shock - Cane Creek inline coil, W. 500lb Vault spring. 22.2 X 8 hardware.
Headset - Dartmoor Blink, sealed.
Cranks - Shimano SLX, 175mm.
Chainring - Shimano SLX, 34t.
Bottom Bracket - Shimano XT.
Chain - KMC something.
Cassette - Shimano XG1150, 10-42t, 11spd.
Chainguide - 77 Designs, top guide.
Rear Derailleur - Shimano XT M8000.
Shifter - Shimano XT M8000.
Rear wheel - 27.5 inch Alex Supra 35 on 142mm Novatec, HG driver, 32h W. 27.5 Maxxis Tomahawk 2.3, 3C DD TR EXO, tubeless W. 20mm custom insert.
Seat post - Easton, 30.9mm.
Seat - Yak, something. Has a rip in the fabric, but it'll get you through.
Bars - Chromag Fubars OSX, 25mm rise, 800mm width, 31.8mm clamp.
Stem - Nukeproof warhead, 60mm, 31.8mm clamp.
Rotors - Formula 203mm X 2.
Seat post clamp - Marino, black.
Headset / stem top caps - Both black and silver included.
Grips - Raceface lock on grips, 95% remaining.
Brand new Reckless mud guard.
Stan's sealant.
Brand new inner and outer cables for you to install.

Includes all cable clamps, this has a cable mounting point on the headtube (not through the headset!) that's an excellent feature and keeps everything in place and neat and tidy.

Internally routed dropper and front end derailleur cables.

Well used, chips, scratches, tyre rub, cable rub, nothing major / structural. A lot of 3M rubber mastic tape protecting the major bits. Main pivot bearings still running smooth.

Derailleur scratched, but still working well.

Pics are below and let me know if you want any more, or anything specific. Thanks.

IMG_20230418_003316_copy_2762x1184.jpgIMG_20230417_235842_copy_1742x1727.jpgIMG_20230417_225340_copy_2066x1549.jpgIMG_20230417_225331_copy_1968x1476.jpgIMG_20230417_225324_copy_2343x1300.jpgIMG_20230417_225157_copy_2112x1584.jpgIMG_20230417_225149_copy_2034x1525.jpgIMG_20230417_225134_copy_2489x1268.jpg
 
Top