VIC Take some free stuff

Plankosaurus

Hydraulic Jack specialist
It's not so much that I'm running out of room, I just figure none of this will get used here and might somewhere else.

Things you can swap with me:
Flat pedals
Iscg05 guide

Item: bomber Z1 sport rcv
Location: narre warreb
Item Condition: good used
Reason for selling: weigh more than 4 complete bikes
Price and price conditions: swapped them for a hope rear hub with a busted axle, that's what they're worth to me (wkkie has made me an offer i couldnt refuse)

Item: reverb external dropper, 31.6, 125mm
Location: narre warren
Item Condition: smooth, but squishes 20mm or so when extended and has a scuff on the stanchion
Reason for selling: I have spare ks posts, this isn't going to get used
Price and price conditions: it's worth FA to me, swap me something (off to moorey for janelle's kid)

Item: iscg05 top guide. For ebikes
Location: narre warren
Item Condition: new
Reason for selling: dafuq!? Apparently ebikes have their own standard and the offset is all wrong on this, can't use it
Price and price conditions: cost me $30, swapps please!

Item: dtswiss rear hub, 142x12, straight pull, Centrelock, hg.
Location: narre warren
Item Condition: looks fine
Reason for selling: oops, imagine not looking into things before buying them. meant to take the axle for another dt hub I have, didn't check the existing one first and it turns out that's 150x12
Price and price conditions: swappo! You can have the 150x12 hub too, it's also useless to me. (taken by oddjob)

Item: DX look alike SPD pedals. so close to the olde metal cage DX pedals, but lack any markings, and they're yellow instead of red.
Location: narre warren
Item Condition: good, little scuffing but bearing seem smooth as silk still
Reason for selling: i have 3 unused sets of clipless pedals, these might as well get some use somewhere else
Price and price conditions: swap me some stuff... or take them for nothing, they might aswell get used

Item: gear free drop bar brake levers and short v brakes
Location: narre warren
Item Condition: close to new, used them a couple of times.
Reason for selling: single speed cx? What was I thinking
Price and price conditions: not sure if they're worth a swap, probably belong in the freebie pile...



Item: freebies
Location: narre warren
Item Condition: free
Reason for selling: look at it, free for a reason
Price and price conditions: free
some 3x stuff to oddjob
some 8x stuff to dan
and a stem to beaker?
Added blackspire tensioner
Added shimano flight deck computer (wtf am i doing with this?)
Added ye olde XT levers
Added bb5 calipers + a new set of pads
Added some colourful T handle hex tools




Sent from my G8441 using Tapatalk
 
Last edited:

moorey

Ask me about Piriformis syndrome
Let me check if Quinn’s friends bike is 30.9 or 31.6. I’m sure we can work out something if it’s the right size.
 

creaky

XMAS Plumper
Item: dtswiss rear hub, 142x12, straight pull, Centrelock, hg.
Location: narre warren
Item Condition: looks fine
Reason for selling: oops, imagine not looking into things before buying them. meant to take the axle for another dt hub I have, didn't check the existing one first and it turns out that's 150x12
Price and price conditions: swappo! You can have the 150x12 hub too, it's also useless to me.
Is this a star ratchet based hub? If so, I’d be interested.
Cheers
 

Plankosaurus

Hydraulic Jack specialist
Let me check if Quinn’s friends bike is 30.9 or 31.6. I’m sure we can work out something if it’s the right size.
No problemo, first in line

I'm being unfair, it's probably more like 3 and a half complete bikes. However you look at it they're heavy.
Straight steerer long travel forks though, so probably worth 5 times their actual value


Sent from my G8441 using Tapatalk
 

Plankosaurus

Hydraulic Jack specialist
Is this a star ratchet based hub? If so, I’d be interested.
Cheers
Oddjob beat you sorry, I honestly didn't think they'd be popular at all

Hopefully same as the other 350 hub, otherwise I was fighting a losing battle in 2 fronts


Sent from my G8441 using Tapatalk
 

Plankosaurus

Hydraulic Jack specialist
And disturbingly, those gearless drop bar brakes are of interest. I know not why?
Crikey, whats wrong with you!?

...I mean, yes, of course this quality item will be useful and not at all painful to find a suitable project for and use.

Sent from my G8441 using Tapatalk
 

moorey

Ask me about Piriformis syndrome
Yep. 31.6. Have you tried a reverb bleed? Hesitant is the seal head is the issue.
 

Plankosaurus

Hydraulic Jack specialist
Yep. 31.6. Have you tried a reverb bleed? Hesitant is the seal head is the issue.
I tried everything!
Scowled at it
Swore at it
Yelled at it
Removed it in disgust

Nope, haven't bled it, or attempted any troubleshooting. Best I can give you is that a mates one has a similar issue, but will remain firm if flipped upside down and actuated. This one does not.

Edit - if it's for one of the younglings, just take it for nothing. If you can't fix or they don't like, zero loss

Sent from my G8441 using Tapatalk
 
Last edited:

moorey

Ask me about Piriformis syndrome
For Janelle (clubmud) and Rods daughter. @rextheute donated the bike and I made some kid friendly adjustments. Will find something for you to swap. @Labcanary tells me I’m doing some courier work or you 2 this weekend?
 

moorey

Ask me about Piriformis syndrome
You drive a hard bargain. Hope to see both you and young Chloe racing KOB very soon.
 

Plankosaurus

Hydraulic Jack specialist
Just wondering what the steerer length on the Z1 might be?
yeah, probably should have measured. pretty sure they're over 200mm, and steel. probably accounts for a good portion of the weight - seriously, they weigh as much as most 40+ year old fellas clinging to 26" wheels do ;)
 

zac

Likes Dirt
yeah, probably should have measured. pretty sure they're over 200mm, and steel. probably accounts for a good portion of the weight - seriously, they weigh as much as most 40+ year old fellas clinging to 26" wheels do ;)
Not quite 40 yet thanks... I've got a Z150 boat anchor on the front of my Mongoose, can't imagine the Z1 being any heavier than that thing - it makes a 66 look like a SID WC :D

Would you mind measuring the steerer if you get a chance? I could be fairly interested for the right price...
 

Beaker74

Likes Dirt
I'm interested in the forks too if they are still available.

How much does 4 bikes cost to ship to QLD?

And that white stem in the freebie pile :rolleyes:
 

safreek

Vealcake
I have some 24 pedals crossthreaded into some old Xt cranks, purrfect swap for a fork.
I can't unscrew it so it's permanently there
 
Top