What did you do TO / WITH / FOR your bike today!

Don't turn too sharply to the left!

Going for a huge "second" spring chamber for max linearity?
Will there be an earth shattering ka-boom?
Rode last night, just a Kurrajong XC ride.

Ran the same pressure in the main (expanded) chamber that I was running pre-NotNoken experiment. Definitely felt like I had more grip and the plantation side was definitely running pretty sandy/slippy as usually. Small bump was improved. And I used more travel on a g-out that I would traditionally not use as much on. Still no bottom out which was good.

But need to ride some more rowdy trails to really test it out. Definitely seems to be some merit to the MRP Noken.

Now I just need to make it less of an obnoxious eyesore.
 
Rode last night, just a Kurrajong XC ride.

Ran the same pressure in the main (expanded) chamber that I was running pre-NotNoken experiment. Definitely felt like I had more grip and the plantation side was definitely running pretty sandy/slippy as usually. Small bump was improved. And I used more travel on a g-out that I would traditionally not use as much on. Still no bottom out which was good.

But need to ride some more rowdy trails to really test it out. Definitely seems to be some merit to the MRP Noken.

Now I just need to make it less of an obnoxious eyesore.
Nice. I can’t recall company possibly Rulezman who adds an air valve to crown and uses that as extra chamber and another company that runs a connection from bleed valves.

Will this work like a Secus and mount it to bottom of fork or required at the top? Sorry bit of a dummy so not sure if your adding a chamber or Increasing volume or both.
 
Nice. I can’t recall company possibly Rulezman who adds an air valve to crown and uses that as extra chamber and another company that runs a connection from bleed valves.

Will this work like a Secus and mount it to bottom of fork or required at the top? Sorry bit of a dummy so not sure if your adding a chamber or Increasing volume or both.
Yeah might've been Intend with the Hollow crown setup.

Everflow is the guy with the bleeder connections.

What I was aiming for was to increase the main air spring volume to compensate for the fact I have a DSD Runt style high pressure chamber that probably takes up the same space as 1.5 tokens. The Secus in my understanding is increasing the lower leg volume to also create a more linear spring curve.
 
Off work early, so went to work on the monster tree...coz y'know noone else is gonna do it.
Cut all the limbs off so I didn't get knocked out.
Compress_20250117_201919_9560.jpg

This splintered bit hanging off the other tree was sketchy AF about 12m tall..cut and run type scenario, had no idea which way it was going to go, luckily I ran the right way.
Compress_20250117_201918_8799.jpg

Little ozito goes hard.
Compress_20250117_201920_0488.jpg

And some freehand artwork for the punters.
Compress_20250117_201921_1490.jpg
 
Love the calling card @Mattyp


Hope you put all those lopped limbs to good use. It would be a shame for them the be left to rot.
 
Fixed the chirpy/squeaky brakes.

After 3 months of putting up with both brakes giving a loud chirp on application (goes away once brakes are on), it was obvious that it's not a bedding in issue.

Switched from the SRAM HS2s, back to the Centerlines from the old bike. Brakes are now dead quiet and pure bliss.

Now no one has to know how often I brake :p
 
Back
Top