What did you do TO / WITH / FOR your bike today!

Mint day for sum slappin and blind boosters to nowhere.
IMG_6295.jpeg

IMG_6299.jpeg
 
The Soma has a 644mm stack for my size. I could actually consider trying an angled stem before thinking of a new frame.
I've got a 30mm stem and the bars angled upward slightly but still need to be a little more upright as my neck gets sore after a while from the riding position. I also never use the drops as I feel too crunched over. I don't know what any of this says about my fit for the bike.
 
Raced the Tas Gravity Enduro at Maydena yesterday and ended up with the second spot on the podium.🙂

Saturday practice was a fairly wet up the top of the hill but was reasonable from midline down. Race day was prime and apart from Marriotts being a bit greasy, the rest of the trails were mint!

After Saturday's practice
1742763424869.png
1742763451405.png


My accommodation for the weekend.
1742763517461.png


Got a bottle of plonk for a second place.
1742763564303.png
 
Last edited:
Raced the Tas Gravity Enduro at Maydena yesterday and ended up with the second spot on the podium.🙂

Saturday practice was a fairly wet up the top of the hill but was reasonable from midline down. Race day was prime and apart from Marriotts being a bit greasy the rest of the trails were mint!

After Saturday's practice
View attachment 415952View attachment 415953

My accommodation for the weekend.
View attachment 415954

Got a bottle of plonk for a second place.
View attachment 415955
Shame you don't drink. Swap for chocolate.
 
Raced the Tas Gravity Enduro at Maydena yesterday and ended up with the second spot on the podium.🙂

Saturday practice was a fairly wet up the top of the hill but was reasonable from midline down. Race day was prime and apart from Marriotts being a bit greasy the rest of the trails were mint!

After Saturday's practice
View attachment 415952View attachment 415953

My accommodation for the weekend.

Got a bottle of plonk for a second place.

I see because of your previous podium placings they offered you the 5 star accom.
I can see why Maydena shuts over winter. Someone told me if going to rain in Tassie Maydena will be the place.
 
Maydena is the reason why Hobart gets bugger all rain and is the second dryest capital city.
That's why I am reluctant to drive all the way down there to have a ride. A number of people have told me they have driven from up north on a cloudless sky day to get just about to Maydena and then start seeing dark forboding clouds suddenly appear.
 
Contemplating replacements for the roadie. Love the Defy though, ticks all the boxes for me as a pure roadie - clean design and gimmick free. At least it did before the 24 model year when they went more aggressive geo and adopted the fucking cables through the headset crap... grrr. 22 and 23 models loong gone in the shops - saw one in brisbane about a year ago and was tempted.

But - have a work trip to Singapore in May. And guess what the Giant dealer there has on sale in my size :)

Not keen on electric gears, so will probably flip the group and put 105 mechanical 12 speed on it. And maybe some cash back in the bike fund.

I don't do road bikes, but any of these the flavour you want...

 
Shame you don't drink. Swap for chocolate.
I already swapped the beer for the bottle of wine as at least my wife will drink it. I'd take chocolate if they offered it and I do drink, just not that much.
That's why I am reluctant to drive all the way down there to have a ride. A number of people have told me they have driven from up north on a cloudless sky day to get just about to Maydena and then start seeing dark forboding clouds suddenly appear.
I've had a pretty good run at Maydena with only one other slightly wet ride there in the past.
 
I could actually consider trying an angled stem before thinking of a new frame.

Grab one of these as a tester, then if it works you could look for a better brand if you didn't trust the ali stem... though I would be ok with it as its on a gravel bike. Rub it down and rattle can it to your colour, then lacquer it.

 
Got the call from the carbon frame inspector - significant delamination in the steerer. Glad I had the fork checked…

To be fair it was not conclusive it was impact related and may just be from 10 years and probably something like 20K kms. Will get the frame checked before i get a new fork.
Or...
New Bike Time. You can put the money that you would spend on the frame getting ultrasonically checked, toward a new bike.
 
Or...
New Bike Time. You can put the money that you would spend on the frame getting ultrasonically checked, toward a new bike.
Am probably doing both :) If the frame is ok I can get a new fork from Giant, and I’ll do that - I love this thing and we’ve spent many years and kms together. I’ll be keeping it for sure.

But I’ll get the new one as well - it’s going to be the last roadie I’ll probably ever buy. Last of the proper cable routing and nice clean design. All the new stuff from all brands leaves me cold with their stupid cables through headset crap and frame design gimmicks… May not ride it much (at least not while I’m in Tasmania), but it’s a very high end slick thing and life is short.

N+1 FTW :)

(Kirsty says I have to sell the old one if I get a new one, but she doesn’t really believe it. She said I’d need to sell the Trance when I got the Orange too… I haven’t said too much about the Canyon Grizl I need yet).
 
Grab one of these as a tester, then if it works you could look for a better brand if you didn't trust the ali stem... though I would be ok with it as its on a gravel bike. Rub it down and rattle can it to your colour, then lacquer it.

Good call - it also means I can get the laser bar and saddle straightener because why not ;)

Just got my Coospo C500 bike computer and arm strap HRM delivered today - rain forecast all week :(
 
I've got a 30mm stem and the bars angled upward slightly but still need to be a little more upright as my neck gets sore after a while from the riding position. I also never use the drops as I feel too crunched over. I don't know what any of this says about my fit for the bike.
I have a 50mm Norco stem from my daughter's bike (she got the Canyon G5 because it looks cool!).

I'm still playing with setup since I removed the dropper post - I had that just perfect but of course I forgot to measure everything so back to the drawing board! I'm finding a bit too much pressure on the hands again even with the saddle lowered.
 
Back
Top