XO cranks for 2011 trek ex9

Cletus

Likes Dirt
hey guys just wondering if any of you out there have tried fitting XO cranks to a 2011 trek ex9? i have a set of XO gxp cranks and the non drive side sits loose in the bearing. bb30 spindle is way too big, what else can i try? Ive just removed the stock xt triple and want to run a sram 2X10 set up.

oh and just so you know the ex9 has a press fit bottom bracket.
 
Last edited:

tomacropod

Likes Dirt
Sounds like you've got a BB92 Shimano press-fit. You'll need the Truvativ GXP unit to suit that shell, then get the cranks of your choice. You may not need to replace the front derailleur depending on how much adjustment you have.

- Joel
 
Top