Hi Guys, new to the forum, looking for a bit of a double check on what I plan to do and if I've missed anything. I have a 2017 Merida Big Nine 100 with Shimano Alivo gearing and a FH-TX505 freehub. It's currrently 3x9 giving ratio's of 0.71 -3.98. I want to upgrade to 1x10 and believe I'll get 0.83 - 3.19. I plan to buy and install the following to make this work;
https://www.ebay.com.au/itm/Shimano...itm=263431985649&_trksid=p2047675.c100623.m-1
https://www.ebay.com.au/itm/RACEFAC...122942400230?_trksid=p2385738.m4383.l4275.c10
Can I get someone who knows what they are doing to confirm this will work, mainly that the deore groupset will fit on the above freehub. As well as confirmation that the chainring will fit on the existing crank setup, will I need spacers for the chainline? Do I need anything else to do this. Bike specs are below;
http://www.99bikes.com.au/merida-big-nine-100-matt-black-signal-red-grey-2017
https://www.ebay.com.au/itm/Shimano...itm=263431985649&_trksid=p2047675.c100623.m-1
https://www.ebay.com.au/itm/RACEFAC...122942400230?_trksid=p2385738.m4383.l4275.c10
Can I get someone who knows what they are doing to confirm this will work, mainly that the deore groupset will fit on the above freehub. As well as confirmation that the chainring will fit on the existing crank setup, will I need spacers for the chainline? Do I need anything else to do this. Bike specs are below;
http://www.99bikes.com.au/merida-big-nine-100-matt-black-signal-red-grey-2017