link1896
Mr Greenfield
With forks at 130mm, HA will be about 69 degrees.Flippin' heck, that makes my head angle look slack!
With forks at 130mm, HA will be about 69 degrees.Flippin' heck, that makes my head angle look slack!
What's the bottom bracket and seat angle doing with forks that long? Can you use offset bushings or a works headset to keep the rest of the geometry intact?With forks at 130mm, HA will be about 69 degrees.
Here’s a simulation of what 130mm forks will do. Bb is a tad high, but on 26” wheels still probably ok. Will just ride it first once all together before I worry.What's the bottom bracket and seat angle doing with forks that long? Can you use offset bushings or a works headset to keep the rest of the geometry intact?
The HA is slacker than an older Anthem in any case, GT was one of the first brands to head out on limb and go slack.With forks at 130mm, HA will be about 69 degrees.
Just gotta invert that stem to get the stack height back downHere’s a simulation of what 130mm forks will do. Bb is a tad high, but on 26” wheels still probably ok. Will just ride it first once all together before I worry.
Different stem, super low stack headset. Might even think about a custom upper headset cup to get the bearings lower then the top of the head tube on the outside, but headtube OD is more then 44mm.Just gotta invert that stem to get the stack height back down