1x10 bb30 conversion

[dasher.11]

Fellow Burners,

I'm considering converting to 1x10 from 2x10,
I am currently trying to look around rotorburn and other forums but havent had a heap of luck in finding info
on how to convert a sram XO 2x10 with BB30 to a 1x10.

The only removable spider I have been able to find is a north shore billet one - does anyone know of any other options?
I know an MRP bling ring is not compatible so im pretty much all out of ideas...

Im running a stumper evo so have ISCG tabs for a chain guide.

Any info would be helpful,

cheers

 

[0psi]

There are a few spiders available for the XO crankset, some of which just use a standard BCD so you can just use any old ring, E*13, MRP and the like.

There are a few rings that bolt straight on like the North shore billet but I'm at work so can't be bothered searching right now, plus my coffee is about finished so I actually have to go do work.

 

[pliskin]

interested to see if you had any luck. im considering doing the same thing on my enduro.

 

[dasher.11]

I didnt really come up with too much else, was potentially looking at making the conversion on my stumpy evo
not keen on downgrading my xo crankset so something cheaper just to try it out and couldnt find many other replacement spiders!

 

[Ivan]

MRP bling ring? Not sure if the bb30 spider is the same as gxp.....

 

[dasher.11]

bling ring is not compatible with bb30

 

[99_FGT]

You could try some Homebrew? Haven't run them, but should fit the bill.
http://www.homebrewedcomponents.com...sramtruvativ-x7-x9-and-x0-2x10-cranksets-only
Otherwise an XX1 ring, although I'm not sure on the BCD of that one. Edit - nope they are 76mm BCD
Al..

 

[wattieez]

Pretty sure homebrewed is no longer able to receive orders due to shit that's gone down.
I'm still waiting for my chainring, been about 8 months.

Go check your LBS, you should be able to get a different BCD spider