2010 Fox40 brake adaptor for 8" saint brakes... confused!

[rsquared]

hey,

ok, so what adaptor do I need to run saint brakes with 8" rotor on 2010 fox40's??? I thought it would just be the standard IS 8" adaptor but have read a couple of places on the net that say you need to run a 6" adaptor on the 40's to run a 8" rotor. Can anyone clear this up???

http://www.chainreactioncycles.com/Models.aspx?ModelID=13745

Is that adaptor in the link the one I need?

Cheers

 

[bikesarefun]

99% certain you won't need an adapter at all. They bolt straight on to my Totems without the need for any adapter.

 

[jgdj18]

I'm running saints on 2010 fox 40s.

Its the same system as the avid brakes use, from memory, this is no adaptor just bolt straight on. Don't have the bike here though so can't double check.

 

[death sniper]

im not sure about 2010 fox 40s but all models have needed a 6" brake mount for 8" discs

you will want this one

http://www.chainreactioncycles.com/Models.aspx?ModelID=13743

this is the same as what i am running on my 2007 fox 40's and to my knowledge they haven't changed them

correct me if im wrong

 

[MARKL]

im not sure about 2010 fox 40s but all models have needed a 6" brake mount for 8" discs

you will want this one

http://www.chainreactioncycles.com/Models.aspx?ModelID=13743

this is the same as what i am running on my 2007 fox 40's and to my knowledge they haven't changed them

correct me if im wrong

And ditto - I am running the same adaptor on my 2011 Fox 40's with Saints.