Adding volume spacers to a Rockshox Vivid Air r2c shock?

[mossmanguru]

Anyone know how?
I bought the spacers and was told theres lots of tutorials for it, although I can only find ones for monarchs.
I did find this service manual ( http://www.sram.com.cn/sites/defaul...0000004402_rev_c_vivid_air_service_manual.pdf ) although I feel there would be an easier way to get under the air can rather than pulling it apart completely?
If anyone has a step by step or youtube vid that would be dope!

 

[teK--]

Quite sure with the Vivid you need to pull the whole air can apart since it is a twin tube design. I recall reading that you need the special seal head tool.

 

[mossmanguru]

Quite sure with the Vivid you need to pull the whole air can apart since it is a twin tube design. I recall reading that you need the special seal head tool.

Bloody stupid if thats the case, they call it their most advanced shock and its not user friendly. Rockshox need to take a page out of Fox's book. Im on my way to get a pin wrench to see if I can follow the service manual to access the can.