Flow-Rider
Burner
I'm 90kg @ 167, 79cm length would fit me like a dress.Those numbers are my numbers, luckily I usually just squeeze into a Large.
I'm 90kg @ 167, 79cm length would fit me like a dress.Those numbers are my numbers, luckily I usually just squeeze into a Large.
Zanerobe and AS Colour do long fit t-shirts.Try buying shirts for narrower shoulders but long body. Long fit t-shirts were a thing for a while but that's died now so I'm back to ridiculously baggy shoulders again..
Thanks for the tip but I'm not paying $50 for something that costs $3 to make.Zanerobe and AS Colour do long fit t-shirts.
typical asian sizing chart unfortunately. 56 chest for XL and 68-76kgs. That's a medium sized Western Male. 73cm isn't going to be long enough for a 6 foot bloke.The sizing numbers are all over the place, the best way I've found is to measure a jersey you already have and transfer the measurements to their sizing charts. They usually give you charts with measurements with every different vendor like this one below, I tend to ignore their weights & heights.
View attachment 374335
Haha thanksOK, I'll let them know.
I have an Ican S3 in my possession as of today. Looks pretty good. Was 8 business days from payment to delivery, total cost was $1335aud on my doorstep so roughly a 1/4 the cost of a branded frame and actually obtainable, unlike a branded frame.I'm contemplating this one to build up as a XC bike: https://icancycling.com/collections/mtb-frame/products/xc-full-suspension-mtb-bike-frame-s3
Unless it’s made by hunt wheelsThanks for the tip but I'm not paying $50 for something that costs $3 to make.
I don't mind the look of that. Having seen a few Chinese generic bikes I would recommend pulling all the pivots apart and having a good look, greasing and adding loctite, shims and crush tubes as required.I have an Ican S3 in my possession as of today. Looks pretty good. Was 8 business days from payment to delivery, total cost was $1335aud on my doorstep so roughly a 1/4 the cost of a branded frame and actually obtainable, unlike a branded frame.
The geo was allegedly developed by NS Bikes and the front triangle allowed to be open mold. Rear triangle is Ican specific, Carbonda also have their only single pivot version. The basic frame is also offered by Vitus as their Rapide FS.
Cool. I ended up going a different direction and got a steel hardtail frame instead. Does the $1335 include a shock? I think I worked out it was going to cost me a bit over $2k including a decent shock.I have an Ican S3 in my possession as of today. Looks pretty good. Was 8 business days from payment to delivery, total cost was $1335aud on my doorstep so roughly a 1/4 the cost of a branded frame and actually obtainable, unlike a branded frame.
The geo was allegedly developed by NS Bikes and the front triangle allowed to be open mold. Rear triangle is Ican specific, Carbonda also have their only single pivot version. The basic frame is also offered by Vitus as their Rapide FS.
Are you saying they applied any material science to a t-shirt that would add value? Do I get a crash replacement policy for a t-shirt?Unless it’s made by hunt wheels
It's up to you to disprove their claims.Are you saying they applied any material science to a t-shirt that would add value? Do I get a crash replacement policy for a t-shirt?
Inbuilt stability control would be a cash cow.Are you saying they applied any material science to a t-shirt that would add value? Do I get a crash replacement policy for a t-shirt?
Are you saying they applied any material science to a t-shirt that would add value? Do I get a crash replacement policy for a t-shirt?
No shock. I had a Merida Ninety Six that I broke and will be using the 165x38 shock from it. I will need to machine up a trunnion adaptor for it though.Cool. I ended up going a different direction and got a steel hardtail frame instead. Does the $1335 include a shock? I think I worked out it was going to cost me a bit over $2k including a decent shock.
I'll need to strip it completely to paint and intended on doing all those things.I don't mind the look of that. Having seen a few Chinese generic bikes I would recommend pulling all the pivots apart and having a good look, greasing and adding loctite, shims and crush tubes as required.
I ordered 3 things 31st of last month.Is 3-4 weeks about right for standard aliexpress shipping?