Burgtec Offset Bushings for 2012 Giant Glory

[rednightmare]

So I've got a 2012 Giant Glory and am wanting to slacken the HA and lower the BB a little with some offset bushings.

Burgtec seem like the go, but can't find what kit I would need for my bike on their website. Has anyone done this with a 2010 - 2012 Glory? If so, what kit did you use and did you have any clearance issues?

 

[willsy01]

I'm not sure if the Glory is the same as the Trance, but if it is you can only fit them to the top mount.

 

[rednightmare]

I'm not sure if the Glory is the same as the Trance, but if it is you can only fit them to the top mount.

So if that were the case, I guess it would only slacken the HA by about 0.5 degrees and wouldn't drop the BB by much. Still interested though. Anyone else got any info?

 

[merc-blue]

You need a 8mm x 1.180in/29.97mm reducer

A burgtec7064 reducer will be what your after.

 

[rednightmare]

You need a 8mm x 1.180in/29.97mm reducer

A burgtec7064 reducer will be what your after.

Thanks for that.

 

[Puddleduck]

There was another thread on the 'burn recently about Burgtec's. Get in touch with pushie, they'll sort you out.:thumb:

 

[adrian1908]

rednightmare-Iam also buying Glory 2012 this saturday and want to slacken the HA a bit. What parts are you going to buy then?