DEITY DIRTY 30" bars and 08 line up!!

[leitch]

I never really considered Deity components before because of their weight

what, too light? Deity stuff is by no means heavy

Are those cranks single ring only or can they take triple rings?

i would guess that by running a bolt-on spider you could get up to 2 rings, but not a granny ring as you would have no tabs.

 

[Trizender]

Hmmm... you're right. I just checked out the website. What the hell was I thinking of then?

Better buy a handlebar to make it up to them.

 

[j5ive]

You could always use an e13 spider. They have the granny tabs.

 

[Cameo]

i would've thought by these trends that deity would've brought out a 3" bar by now...

'08 stuff looks great, the seatpost is pretty cool.

 

[nicho]

i would've thought by these trends that deity would've brought out a 3" bar by now...

'08 stuff looks great, the seatpost is pretty cool.

Well Luckily i have NPJ here who set the 3" trend two years ago and same for DIETY they don t follow trends. THey set them!

Nicho

 

[Richo 18]

I couldn't find it, what are the crank arms made of.

The old ones were 4130 so what are these?

Sorry if it's a bit late. But I figured it's a worthy question.

 

[nicho]

Hey richo,

sorry for the delay.
Yes the old ones were made from cromo and so are the new ones.
They are very light and will come with a ti spindle option which will make the cranks lighter than a set of saint cranks.

nicho

 

[Richo 18]

Wow! The new ones are cromo too!

That's fucking cool.

Definitely getting some then.

Do they work with most BMX sprockets, (Tree, Profile) too?
I'd really like a 28t termite but I think there's a slight chance that I might have to go 32t.



Thanks nicho!

 

[Callan.]

Wow! The new ones are cromo too!
That's fucking cool.
Definitely getting some then.
Do they work with most BMX sprockets, (Tree, Profile) too?
I'd really like a 28t termite but I think there's a slight chance that I might have to go 32t.
Thanks nicho!

They will work with all BMX sprockets, assuming they have a 19mm hole.

 

[Richo 18]

Actually callan,

I know you get asked 1000's of time everyday,
And I know that you're going to hate me for asking,

and I know it's been covered,
especially by you,



BUT.


On an STP(sigh) will 28:13 be fine with a KMC chain/KMC with Halflink/s /Half Link chain,


Without a tensioner

The only definitive post I can find by you is that 32:15 works fine with KMC chain with/a halflink/s.

Sorry to be a farkin-squid-stp-piss annnoyance.

 

[Gluey_trails]

On an STP(sigh) will 28:13 be fine with a KMC chain/KMC with Halflink/s /Half Link chain,

In short, it should.

 

[|Matt|]

32-16 on an STP works with perfect tension without any halflinks, only a KMC chain cut to size, and is a similar ratio to 28-13.

Actually callan,

I know you get asked 1000's of time everyday,
And I know that you're going to hate me for asking,

and I know it's been covered,
especially by you,



BUT.


On an STP(sigh) will 28:13 be fine with a KMC chain/KMC with Halflink/s /Half Link chain,


Without a tensioner

The only definitive post I can find by you is that 32:15 works fine with KMC chain with/a halflink/s.

Sorry to be a farkin-squid-stp-piss annnoyance.

 

[Richo 18]

Yay, fucking 31t Chainrings here I Come.

I'd be buying 32-15 if I wasn't buying a termite sprocket, which is why I'm asking. Calling Callan.

 

[Callan.]

Yay, fucking 31t Chainrings here I Come.

I'd be buying 32-15 if I wasn't buying a termite sprocket, which is why I'm asking. Calling Callan.

I refuse to answer.

 

[Richo 18]

Noooo...

I was hoping you weren't in that frame of mind.

Fuck.

At least give me a super high resolution photo of your old STP with drivetrain attached so I can squint and figure out myself.
Pleeeaaasee.

Just get the answer out there for all the pesky PM'ers who ask you day after day, and make it big and bold and all.
Then put a link in your sig.
"Perfect ratio for STP ( link here), PM me and I will have you banned"
Or something along those lines.

 

[grandmabacon]

nice!!!!

God I love them, how much would you be looking at for a White Bar and Stem combo also how much would some of those cranks be worth new, anybody?

 

[|Matt|]

Yay, fucking 31t Chainrings here I Come.

I'd be buying 32-15 if I wasn't buying a termite sprocket, which is why I'm asking. Calling Callan.

Sorry mate, it was a typo. 32-16 works perfect. Sorry!

I know 32-16 works, I set it up on my brothers bike with the KMC chain. Its the 20 buck one, is that the 710 model?

 

[nicho]

God I love them, how much would you be looking at for a White Bar and Stem combo also how much would some of those cranks be worth new, anybody?

HEy mate,

well the cranks should retails for about $390 depending on the shop.

We are getting our first sets of the Vendetta cranks next week with hop up kits to 83 mm bb and ti spindle option to get the cranks sub 900 gram.

gonna be very impressive.

nicho

 

[grandmabacon]

HEy mate,

well the cranks should retails for about $390 depending on the shop.

We are getting our first sets of the Vendetta cranks next week with hop up kits to 83 mm bb and ti spindle option to get the cranks sub 900 gram.

gonna be very impressive.

nicho

What about the bar and stem together White

 

[nicho]

Well the new bars and stem will be available from the 1st of january.
However we still have current stock of the 25.4 bars and stem until the 07 stock lasts.

nicho