Delete.

[zaccyboy]

I don't know how to get my pro pedal adjuster back on?

Thanks in advance,
Zac.

 

[udi]

Two little springs go in each of the two holes in the shock body (there are 2 deep holes for them) and then you sit the balls on top of the springs. Use a little grease to lube them, and stop them falling - they're pretty easy to lose.

 

[dirt_rider17]

yeah just put the springs in the holes and the bearings on top then push down on the pro pedel while doing up the screw so the bearing dont fall out but be careful because the bearings are easy to lose ive lost one before

 

[zaccyboy]

Thanks udi,
I worked it out just after I posted the thread.

 

[elliotdhmcgeary]

Might wanna keep your original post up next time, could be helpful to others