Flow-Rider
Burner
You need to start bearings square in the bore or hole. Once they cock sideways even just a mm they start to jamb.
Have fun making your own tools. :fat:
Epic bearing removal fail - HELP!
- Thread starter Nautonier
- Start date
You need to start bearings square in the bore or hole. Once they cock sideways even just a mm they start to jamb.
Have fun making your own tools. :fat:
L.P.
Likes Bikes and Dirt
I have this for bearing press.
http://road.cc/content/review/159272-wheels-manufacturing-large-bearing-press
No tool gives me more satisfaction....
http://road.cc/content/review/159272-wheels-manufacturing-large-bearing-press
No tool gives me more satisfaction....
Nautonier
Eats Squid
Oh my, that is a thing of beauty! WANT!!!
Surely the Chinese have made an imitation for less than $50?
macca_1972
Likes Dirt
You mean something like this?
https://www.youtube.com/watch?v=Sf1jUhjYiIg
I just ordered a set for my Trance (6902, 6900 and 6802), they should be here next week. They come from Taiwan, cost is US$13 per tool, plus US$34 postage. So total cost for me was US$73, I think that converted to $96.
The guy's email address is in the video comments, he takes a couple of days email turnaround and English is basic but he's very helpful. I understand these very same tools were being sold by Superstar at one point.
stoo
Likes Dirt
For that price you could buy a little Hercus 9, some alu stock, and a good drill and tap set.