How far will it raise? Stem with different angle.

[dunk]

Attention people who can do math, I am not one of them, besides who knew it would ever come in handy?

I'm playing around with my position at the moment on my roadie. I was thinking I may raise my bars slightly and go to a shallow traditional bend bar, I still don't know if I anatomic bars.

1. So if I change my stem from 110mm -8 degree to a 110mm 0 degree bend, how far will my bar rise?

2. If I change to a 110mm -8 to 110mm -6 degree how far will my bar rise?

3. For extra credit, how far will my bar raise and change in length from saddle to bar, if I change from 110mm -8 degree to 100mm 0 degree, and 120mm 0 degree?

Oh, before you ask about adding more spacers under the existing stem - it ain't going to happen as there is no steerer to allow it.

Thanks in advance.
Dunk

 

[alchemist]

1. About 11mm

2. about 4mm

3. Raise ~11m, shorten by ~8, lengthen by 11

Of course to get more exact figures we need the HT angle

 

[dunk]

Thanks El Presidente exactly what I was after

Might have to track down a 0 degree stem, mmm Thomson X4

Found this, it might help someone in the future: http://www.habcycles.com/fitting.html