Post up your Hardtail Huck bikes
- Thread starter DirtRida_94
- Start date
Blackthorn
Likes Dirt
My 04 Torrent
It gets hucked n stuff....
It gets hucked n stuff....
mad_mike51
Likes Bikes and Dirt
My Hardtail Huck Bike
Real Men Ride Rigid
Real Men Ride Rigid
joshrides
Likes Dirt
Yeah but its a kona.........and its not a NORCO YAY!!
Really? It looks in the pics like they're MTX33
I can't wait to build up my hucktail, just waiting on some cash-flow
.243 DH frame
66/totem/domain/travis/z1/55/lyric/36
MTX/823/crusher/SAS wheelset
Singlespeeding with bmx everything (cranks, bb, chain, sprockets)
npj wonderbars and Time Zxx Freeride pedals
Just need to settle on forks and wheels. Whatever I can get cheapest I suppose.
sharp
like a spoon
hey mate just lay off the konas alright....haha
just give it a chance its had a hard life
Rippor 215
Likes Dirt
My Manik beats every bodies. I have to ask one question, does it matter if I loose a bar end?
Attachments
DirtRida_94
Likes Dirt
how does it run without a chainguide?
I cant stand the chain hitting me when i'm hucking
I cant stand the chain hitting me when i'm hucking
dj3
Likes Bikes and Dirt
nitrous to burn
Likes Bikes and Dirt
Good luck with that.
Will post mine up on arrival of new parts for DH bike with other shit being swapped to my STP.
Tom.
DirtRida_94
Likes Dirt
Very nice.
Is that A norco Torrent?
Is that A norco Torrent?
Justin Fox
Likes Bikes and Dirt
Still under construction:
CRC custom XT build wheelset with Sun Rhyno Lite XL's, strong DT Swiss champion spokes and DT Swiss Brass Pro-lock nipples. Heavy but cheap and strong enough for me at 2508g and $196.52 AUD.
XT hubs.
Sun Rims.
Maxxis rim tape. I've got billions of these lying around as they come with Maxxis tubes.
I was happy to see these in the box, free XT skewers which are so buttery smooth in comparisson to the sharp and painful to use (but super light weight) KCNC's I'm using on the Reign.
MRP MiniMe System 1 chain guide.
ISCG mount FTW.
The manual (which sucked) suggested I might need to file stuff. I was hoping I'd be lucky, but I wasn't. The inner plate was hitting my frame so I had to mount the rings on the outer side of the crank spider. That meant that I had to file down the outer plate as it was hitting the crank arms. I did a clean-ish job though and got it all to work with little pain.
Fitted!
Splashed out and got this great saddle. Light and the "C" stands for comfort.
Fun SMX stem.
This amazing dude saved my life. No seriously look at the low stack height! My super short steerer is not an issue anymore, in fact I need to use a 10mm spacer now as this stem's stack height is so damn low. Perfect!
Love how fat the Nevegal 2.35's look. They used to be on the Reign ages ago, glad to see them being used again.
Just another shot.
I'm missing:
- Brakes (levers, cables, rotors, calipers)
- Rear derailleur (I'd really like a short cage)
- Chain (I've got a spare weenie one which I'll use for now)
- Grips
- Rear shifter (I've got an LX one spare)
CRC custom XT build wheelset with Sun Rhyno Lite XL's, strong DT Swiss champion spokes and DT Swiss Brass Pro-lock nipples. Heavy but cheap and strong enough for me at 2508g and $196.52 AUD.
XT hubs.
Sun Rims.
Maxxis rim tape. I've got billions of these lying around as they come with Maxxis tubes.
I was happy to see these in the box, free XT skewers which are so buttery smooth in comparisson to the sharp and painful to use (but super light weight) KCNC's I'm using on the Reign.
MRP MiniMe System 1 chain guide.
ISCG mount FTW.
The manual (which sucked) suggested I might need to file stuff. I was hoping I'd be lucky, but I wasn't. The inner plate was hitting my frame so I had to mount the rings on the outer side of the crank spider. That meant that I had to file down the outer plate as it was hitting the crank arms. I did a clean-ish job though and got it all to work with little pain.
Fitted!
Splashed out and got this great saddle. Light and the "C" stands for comfort.
Fun SMX stem.
This amazing dude saved my life. No seriously look at the low stack height! My super short steerer is not an issue anymore, in fact I need to use a 10mm spacer now as this stem's stack height is so damn low. Perfect!
Love how fat the Nevegal 2.35's look. They used to be on the Reign ages ago, glad to see them being used again.
Just another shot.
I'm missing:
- Brakes (levers, cables, rotors, calipers)
- Rear derailleur (I'd really like a short cage)
- Chain (I've got a spare weenie one which I'll use for now)
- Grips
- Rear shifter (I've got an LX one spare)
I_EAT_DIRT
Likes Dirt
Dont want to quoate it becuase of the amount of pics, but that pink bike (not sure what it is) is amazing, love the stem, looking great, maybe for the derailler (sp) a short cage saint?
Amazing build!
Amazing build!
donthucktoflat
Eats Squid
Earlier model Yeti DJ I think.....with a slightly altered drop-out area?
Last edited:
Justin Fox
Likes Bikes and Dirt
Very well spotted sir!!!