nathanm
Eats Squid
So the next collective project is a 2012 Anthem which appears to, like that old joke about the polar bear, blown a seal (fork).
Having never serviced an Fox open bath fork before my research leads me to endless amounts of conflicting info.
So the genuine seals appear to be nla and have been replaced by the new gen flangeless version which apparently need the Fox tool to be installed and the dampers removed?
The Fox 10wt Red fork fluid had been replaced with Green?
Some tutorials show the rebound damper being removed, some dont?
Would appreciate some definitive advice on the correct parts and service instructions from knowledgeable burners.
Can't I just do an old skool rockshox and drop the lowers and squirt 5ml of 15wt each side.
Having never serviced an Fox open bath fork before my research leads me to endless amounts of conflicting info.
So the genuine seals appear to be nla and have been replaced by the new gen flangeless version which apparently need the Fox tool to be installed and the dampers removed?
The Fox 10wt Red fork fluid had been replaced with Green?
Some tutorials show the rebound damper being removed, some dont?
Would appreciate some definitive advice on the correct parts and service instructions from knowledgeable burners.
Can't I just do an old skool rockshox and drop the lowers and squirt 5ml of 15wt each side.