SOLD $4000
For sale is a Yeti ASR-C 2017 Turq series frame (Small) with 650b wheels. A fantastic bike to race or trail ride on smooth to moderately rocky and steep trails. This bike would suit a rider 155 - 175 cm tall. The effective top tube length is 550mm.
The frame was replaced under warranty in December 2017 and has not been ridden. This model can fit an internally routed dropper post.
The remainder of the components, except where noted, were new when the original bike was purchased at the beginning of 2015.
Total bike weight without pedals; 10.4kg
100mm shock travel - Fox Float CTD w/ Boostvalve
120mm fork travel - Fox 32 Evolution Float CTD FIT 27.5 15mm thru axle
SRAM drivetrain
NEW 1150 XD Driver 11spd cassette
NEW PCX1 11spd chain
NEW PF30 Truvative Bottom Bracket
XX1 11spd thumb shifter
XX1 Pressfit carbon cranks with 34 tooth chainring
XX1 Rear Derailleur
Shimano XTR Race brakes with Icetech pads and rotors. 180mm Front /160mm Rear
E-Thirteen 'The Hive' rims laced to Hadley red anodised hubs 32 hole, 6 bolt (15mm thru axle front, 12mm thru axle rear) DT Swiss competition spokes. Hand built by myself in early 2016.
Maxxis tyres - NEW Forecaster front, Ikon rear. Setup tubeless.
ENVE carbon bars 700mm wide.
ENVE seat post 30.9
3T 17 degree stem (run it down for racing, or raise it up for trail riding.)
Chris King sealed bearing Aheadset.
NEW Esi silicon grips.
Fizik Gobi saddle with braided carbon rails.
Yeti branded seat post collar with quick release.
Comes with a load of spare stuff too - 1 x hanger, 4 x main pivot bearings, 1 x bolt up seat post collar and some assorted suspension linkage hardware.
Can be posted Australia wide at buyer's expense.
For sale is a Yeti ASR-C 2017 Turq series frame (Small) with 650b wheels. A fantastic bike to race or trail ride on smooth to moderately rocky and steep trails. This bike would suit a rider 155 - 175 cm tall. The effective top tube length is 550mm.
The frame was replaced under warranty in December 2017 and has not been ridden. This model can fit an internally routed dropper post.
The remainder of the components, except where noted, were new when the original bike was purchased at the beginning of 2015.
Total bike weight without pedals; 10.4kg
100mm shock travel - Fox Float CTD w/ Boostvalve
120mm fork travel - Fox 32 Evolution Float CTD FIT 27.5 15mm thru axle
SRAM drivetrain
NEW 1150 XD Driver 11spd cassette
NEW PCX1 11spd chain
NEW PF30 Truvative Bottom Bracket
XX1 11spd thumb shifter
XX1 Pressfit carbon cranks with 34 tooth chainring
XX1 Rear Derailleur
Shimano XTR Race brakes with Icetech pads and rotors. 180mm Front /160mm Rear
E-Thirteen 'The Hive' rims laced to Hadley red anodised hubs 32 hole, 6 bolt (15mm thru axle front, 12mm thru axle rear) DT Swiss competition spokes. Hand built by myself in early 2016.
Maxxis tyres - NEW Forecaster front, Ikon rear. Setup tubeless.
ENVE carbon bars 700mm wide.
ENVE seat post 30.9
3T 17 degree stem (run it down for racing, or raise it up for trail riding.)
Chris King sealed bearing Aheadset.
NEW Esi silicon grips.
Fizik Gobi saddle with braided carbon rails.
Yeti branded seat post collar with quick release.
Comes with a load of spare stuff too - 1 x hanger, 4 x main pivot bearings, 1 x bolt up seat post collar and some assorted suspension linkage hardware.
Can be posted Australia wide at buyer's expense.
Attachments
Last edited:
..