'Ross
Eats Squid
Item: Marzocchi 66 RC, black, 170mm travel, 20mm thru axle, disc only.
Condition: Really good, these forks have been around a while but have seen minimal use of different bikes, there are some tiny scratches on the legs, some scratches on the top of the crown, the stanchions are perfect! No scratches or any problems at all, they are in perfect glossy black colour as well, no fading or discolouring (anything you see in the pics is just reflection from the window)
Info: (Its the 170mm version)
Tech specifications
- Available colors: flat black
- 150mm or 170mm travel
- hydraulic cartridge with hscv damping system
- open bath
- external air preload
- mx cartridge design with external compression [30] click adjustment
- mx cartridge design with external rebound [30] click adjustment
- coil springs
- new forged crown with cryofit “m” design
- mg monolite one piece arch & sliders xfr design
- ø35mm alloy tapered tubes
- 20mm drop-outs with dedicated axle
- integrated fender option
Stroke Fork length Steer tube-wheel offset Weight
150 572 mm. 43.5 mm. 2780 g.
170 592 mm. 43.5 mm. 2810 g.
Steerer is cut to a reasonable 175mm.
Location: Canberra, will post Aus wide.
Reason: Have not used for a long time, no point keeping them.
Price: $330 posted Australia wide, $300 if you pick up.
Pics:
First to PM gets preference.
Condition: Really good, these forks have been around a while but have seen minimal use of different bikes, there are some tiny scratches on the legs, some scratches on the top of the crown, the stanchions are perfect! No scratches or any problems at all, they are in perfect glossy black colour as well, no fading or discolouring (anything you see in the pics is just reflection from the window)
Info: (Its the 170mm version)
Tech specifications
- Available colors: flat black
- 150mm or 170mm travel
- hydraulic cartridge with hscv damping system
- open bath
- external air preload
- mx cartridge design with external compression [30] click adjustment
- mx cartridge design with external rebound [30] click adjustment
- coil springs
- new forged crown with cryofit “m” design
- mg monolite one piece arch & sliders xfr design
- ø35mm alloy tapered tubes
- 20mm drop-outs with dedicated axle
- integrated fender option
Stroke Fork length Steer tube-wheel offset Weight
150 572 mm. 43.5 mm. 2780 g.
170 592 mm. 43.5 mm. 2810 g.
Steerer is cut to a reasonable 175mm.
Location: Canberra, will post Aus wide.
Reason: Have not used for a long time, no point keeping them.
Price: $330 posted Australia wide, $300 if you pick up.
Pics:
First to PM gets preference.
Last edited:
