What I mean by drill bit is to use a drill bit that is slightly larger than the id of the bushing. Screw bit into bushing then use a set of pliers to pull it out.Don't know about Spank 0edals in particular but I use an appropriately sized drill bit to get bushings out of my Time pedals.
Sent from my M2012K11AG using Tapatalk
Thanks for the clarification.What I mean by drill bit is to use a drill bit that is slightly larger than the id of the bushing. Screw bit into bushing then use a set of pliers to pull it out.
Sent from my M2012K11AG using Tapatalk
Yep done this with the Spank Spike pedals but can't get through from the other side on the Spoon pedals unless I remove the bearingThe bushes aren't very tight in them, you can push them out with the spindle by hand.