At the moment I'm debating my options for the trail bike. Its an older Giant Reign with a Fox Float RP2 shock, and in true Fox Float style it blows through the mid stroke of the shock. Which is only exemplified by the Maestro suspension design leaning hard on the mid stroke. Not keen on spending a huge amount on it as i may switch frame to something else, so looking at cheaper options to keep this going for another year or so.
Currently i figure i have two options that have been suggested on other forums.
The first is to add Volume Spacer shims to increase the ramp rate of the can, and the second is to increase the IFV pressure to 400psi.
Both are relatively simple and cheap options. But I'm wondering whether there are any other options out there, bar completely switching frames or shocks?
Currently i figure i have two options that have been suggested on other forums.
The first is to add Volume Spacer shims to increase the ramp rate of the can, and the second is to increase the IFV pressure to 400psi.
Both are relatively simple and cheap options. But I'm wondering whether there are any other options out there, bar completely switching frames or shocks?