moorey
call me Mia
I’m not talking about good Jews....but point taken...For some one as aware as you that's quite a derogatory remark regarding the good Jews of this world.
I’m not talking about good Jews....but point taken...For some one as aware as you that's quite a derogatory remark regarding the good Jews of this world.
I attempt to catch...its a slight difference. Also I believe is it Jewie when shortening jewfish.Mr, Pink catches lot's of Jewy, ask him for tips if you have trouble landing them.
Phew.For some one as aware as you that's quite a derogatory remark regarding the good Jews of this world.
Damn, they are sold out. 94 bucks for both ends with the tekto. I really should stop procrastinatingSecond hand?
The progressive types often do. Around these ingrained areas moat people still aren't calling them black fish, let alone luderick. Fish people are a strange bunch. The jew fish justification used in modern times is to do we it the mother of pearl plates inside their skulls originally leading to being called jewel fish.I think we are calling them mulloway these days.
I have previous to previous SLX on a bike I’m about to disassemble. M665’s. Perform well, not to DH standards, but nor will what you’re looking at. Let me know if any good to you. Couldn’t express post till Monday though, and it looks like you have an itchy brake finger.Damn, they are sold out. 94 bucks for both ends with the tekto. I really should stop procrastinating
To be honest I don't think the front would be long enough for the monster unfortunatelyView attachment 342466 If you look close, you can see them here. Shortish rear hose, but think I have a 1400+ I could swap if long enough.
Run the rear calliper on the front, you'll need to trim the hose anyway. Get a new hose and run the front calibre on the rear. Connect each calliper to the brake lever of choice for each end and you're winning. Trimming and reconnecting shimano brake lines is easy. You'll end up covered in baby oil as a bonus! Just like you're used to.To be honest I don't think the front would be long enough for the monster unfortunately
Fair enough. Can check for longer fronts too if you want....or use a shorter front on rear.To be honest I don't think the front would be long enough for the monster unfortunately
There’s a brag many men wait a life time to make.I've got some longer hose to donate. I'll check length when I get home.
Sent from my SM-G900I using Tapatalk
I always have a.length to donate to willing recipientsThere’s a brag many men wait a life time to make.
Dems is good brakes (as are the similar [but unlike the subsequent generation, actually different] M775 XTs); although admittedly slightly down on outright grunt compared to the later models, the Servo Wave cam profile is a bit softer than the M988/M785/M666/M675/M596/M615 levers, so gives considerably better modulation, although with a well-tuned grab, the later generation have a ton of modulation too, you just blow past it if you're a ham-fisted gorilla.... The latest generation, M9000/8000/7000/6000 are the best of both - the power of the immediate past generation, with a revised Servo Wave cam for the modulation of the generation before.I have previous to previous SLX on a bike I’m about to disassemble. M665’s. Perform well, not to DH standards, but nor will what you’re looking at. Let me know if any good to you. Couldn’t express post till Monday though, and it looks like you have an itchy brake finger.