Ive been getting package that only show up on tracking when they are delivered...Fcuking Australia Post...why have tracking if they don't even follow it..
Soon my precious, soon!
Ive been getting package that only show up on tracking when they are delivered...Fcuking Australia Post...why have tracking if they don't even follow it..
Soon my precious, soon!
Yeah, I forget too...then when I do, I really feel like I corner better....then forget and go back to being a GumbyTried this today, got some work to do but felt good on a few corners where I got it right.
is that axel all wonky....Front hub feels rough as guts so trying to service for the first time. Do i need to tap out the axle or can i degrease, re-grease the bearings whilst still in the hub?
View attachment 362394View attachment 362395
Sweet! Will be getting one for my Lyrik alsoGot the new C1 Debonair Spring.. Hoepfully it will solve the slop at top out on my Pikelations..
They’re on a race. I left the axle in, cleaned as best I could with WD40 (all I had) and re-packed with grease. It’s heaps better now but still sounds bad and feels a bit grindy. Might just get some new bearings. They’re shitty Formula hubs so an upgrade will be on the cards at some point.@BT180
Are the bearings on a race or each loose?
Of the grease isn't filthy you could probably just force a fresh top up into the space and work it in.
Those bearings look to be cartridge. Should be able to knock them out and replace them.They’re on a race. I left the axle in, cleaned as best I could with WD40 (all I had) and re-packed with grease. It’s heaps better now but still sounds bad and feels a bit grindy. Might just get some new bearings. They’re shitty Formula hubs so an upgrade will be on the cards at some point.
V3 Prime?Rode her at the local-ish trail..