hifiandmtb
Sphincter beanie
God knows what PP is.
Scratch that, got it in. Had to file a little more of a ramp on the headset to start it in straight. Am now fighting to route a dropper cable...Tried to put the headset in the Orange. And failed... Cant for the life of me get it to go in straight, and I'm not inclined to force it.
Might be a trip to the bike shop where I hope they have a better press.
Had to dremel down a weld blob too - they had had a rough go at it at the factory, but it was still proud and would have jammed the headset.
First problem is you used a press.Tried to put the headset in the Orange. And failed... Cant for the life of me get it to go in straight, and I'm not inclined to force it.
Might be a trip to the bike shop where I hope they have a better press.
Had to dremel down a weld blob too - they had had a rough go at it at the factory, but it was still proud and would have jammed the headset.
I'd say buy one but they are out of stock, you need this in your life if you are a home mechanicScratch that, got it in. Had to file a little more of a ramp on the headset to start it in straight. Am now fighting to route a dropper cable...
I have the knock off version https://www.aliexpress.com/item/32953017215.html?spm=a2g0o.store_home.productList_3071319.pic_3I'd say buy one but they are out of stock, you need this in your life if you are a home mechanic
Park Tool IR-1.2 Internal Cable Routing Kit
Park Tool IR-1.2 Internal Cable Routing Kit - Park Toolwww.bikebug.com
Just get a frame with a hatchI have the knock off version https://www.aliexpress.com/item/32953017215.html?spm=a2g0o.store_home.productList_3071319.pic_3
Cable is too stiff to get around the corner at the BB...
Just need some whipper snipper trimmer line and tie a knot in the end. Works a treat for about $3.I have the knock off version https://www.aliexpress.com/item/32953017215.html?spm=a2g0o.store_home.productList_3071319.pic_3
Cable is too stiff to get around the corner at the BB...
Or cotton thread and a vacuum cleaner, cover holes you don’t want the cable out of. Suck or blow, however you’re feeling.Just need some whipper snipper trimmer line and tie a knot in the end. Works a treat for about $3.
Just how small is your car that you have to drop the forks completely to fit the bikes?Took daughter out for a spin at the youies, and picked up some unicorn poop on the way home
1 1/8 totems
no star nut installed, steerer uncut
Sent from my H8324 using Tapatalk
It's a van, there may have been a couple of other stops for parts today. Maybe.Just how small is your car that you have to drop the forks completely to fit the bikes?
A wanker?God knows what PP is.
Sorry Ozzy, been home long enough to choke down dinner. Left Forrest at 2pm. We were booked to stay till tomorrow, but Middle Brother has Year 6 School Captain Photos tomorrow morning.@Cardy George I've just noticed you run 2 x Di2 on your Procaliber, what the gearing ratios front and back ?
What he said, yet still nor short enough for that dog of a course.Excessive for his terrain ratios.
Pull the BB, had to do it with a couple of frames due to the bend. The kit won't help in this instanceI have the knock off version https://www.aliexpress.com/item/32953017215.html?spm=a2g0o.store_home.productList_3071319.pic_3
Cable is too stiff to get around the corner at the BB...
$8 more than you should spend on brake cleaner.....also, never use brake cleaner.Bought brake cleaner from Supercheap Auto, only $8!